Franmar BEAN-e-doo Mastic & Adhesive Remover





An odorless, soy-based mastic remover, Bean-e-doo, is ideal for use in occupied areas like post offices, bean-e-dooschools, hospitals and other public places. Removing vinyl and ceramic mastic is a snap with this user-friendly product. Bean-e-doo was specially designed to remove asbestos mastic, dissolving it into a thick liquid.

It’s so easy and safe to use that Bean-e-doo is the only product to pass both performance and environmental safety tests by the USPS for the removal of asbestos containing mastic. With a flash point over 400 degrees, less than 3% VOC’s, non-toxic, and biodegradable, Bean-e-doo can be used without complaint or disruption.

*Not recommended for use on wood floors

Over 3,000,000 sq. ft. of mastic removed!

  • As low as $0.12 per sq. ft.
  • Virtually No Odor
  • Cleans up easy with water or Franmar’s Emerge Degreaser
  • No Grinding or Dust
  • Less than 3% VOC

Application Specs

Test Area:
Due to variances in surfaces and conditions, always test in a small, inconspicuous area before beginning the whole projectApplication:
Apply BEAN-e-doo directly onto the concrete surface. Spread around with a straw broom or squeegee using light pressure. If applying to mastic with trowel ridges, cover all trowel ridges with BEAN-e-doo. Allow BEAN-e-doo to sit until mastic softens. (Usuallly asbestos/black mastic will soften in 1 to 2 hours, and vinyl or acrylic mastic will soften in 4 to 8 hours.) After mastic has softened, remove with a long handled scraper or squeegee. Reapply if necessary.Clean Up:
Clean remaining thin residue of BEAN-e-doo with Emerge Degreaser or with soap and water using a scrub brush and/or mop or power washer. Allow surface to dry before further preparations.Residue Test:
After clean up, apply water to various small areas on the concrete and rub with fingers. If water turns cloudy white, it indicates there is BEAN-e-doo remaining on the surface. Repeat clean up steps and retest.Usage Tips:

  • Use a sprayer or metal watering can to apply BEAN-e-doo in large areas.
  • Protect floor drains and areas where BEAN-e-doo would naturally flow on uneven surfaces with sand, Oil-Dri, or kitty litter.
One gallon will usually cover between 100 to 200 sq ft. Many customers report getting up to 200 sq ft per gallon.Safe for Use On:
ConcreteDo Not Use On:
Wood surfaceBiodegradablepH Level: 6.65pHVOC (Volatile Organic Compounds) 2.3%, .06 lb/g, 20 g/l

Additional information

Weight 32.4 lbs

, , , , , ,


There are no reviews yet.

Be the first to review “Franmar BEAN-e-doo Mastic & Adhesive Remover”

Your email address will not be published. Required fields are marked *