Description
Description
ChemLink DuraGlaze Plus Sealant
Chemlink DuraGlaze Plus Sealant is a premium grade, extremely elastic, high-performance, moisture-cure sealant designed for use in fenestrations (perimeter sealing windows, doors and panels), curtain wall construction and joints subject to movement. With an extended “tack-free” time in elevated temperatures, Chemlink DuraGlaze Plus Sealant is an ideal product for any project. Chemlink DuraGlaze Plus Sealant adheres to “difficult to bond surfaces” and is suitable for use on anodized metal and coatings such as Kynar 500® PVDF. DuraGlaze Plus has a unique polyether chemistry which eliminates any possibility of out-gassing and protects against “sun tanning” or discoloration when exposed to ultraviolet light.
Features
• Bonds to Kynar 500® PVDF coated metal
• Solvent free, 100% solids — will not shrink
• Non-slump, applies vertically and overhead
• 60-90 minute skin over
• Low dirt pickup
• Color stability — will not stain
• Can be applied to damp surfaces — will not outgas
• Thicker consistency designed based on professional
installer feedback
• Paintable within 24 hours
• Service temperature -40°F to 200°F (-40°C to 93°C)
• Packaged in plastic cartridges and foil sausages
• Easy to gun and tool, speeding up application
• Extended “tack-free” time in elevated temperatures
• Meets all state and federal VOC regulations
• Made in the USA — ISO 9001:2015 certified
Available Sizes
- Carton of 24 – 10.1 oz cartridges
- Carton of 12 – 20 ounce sausages
Stock Colors
- Gray
- White
- Architectural Dark Bronze
| 10.1oz Cartridge – case of 24 | 20oz Sausage – case of 12 | |
|---|---|---|
| White | F1267WH | F1269WH |
| Gray | F1267GR | F1269GR |
| Architectural Dark Bronze | F1267ABR | F1269ABR |
Applications
- Window And Door Frames
- Pre-cast Concrete
- Block And Masonry
- Curtain Walls
- Expansion Joints
- Storefront Systems
- Weather Sealing
- Cove Joints
- arapets
- Air Infiltration Sealant
Compatible Substrates
- Anodized aluminum
- Kynar 500® PVDF Coated Metal
- Galvanized Metal
- Aluminum
- Brick
- Concrete
- Stone
- Wood
- Glass
- Fiberglass FRP
- Engineered Plastics
- Vinyl Siding
- EPS Foam
Limitations
In areas where prolonged chemical exposure is anticipated,
contact Technical Services for recommendations. Allow
treated wood to “cure” for six months prior to application per
APA guidelines. Do not use in areas subject to continuous
immersion. Do not store in elevated temperatures. Remove
all coatings and sealers before application. If product is to be
painted, test and evaluate before application. Polyurethane
and oil-based paints may dry slowly. Please contact
customer service for application guidelines with
temperatures below 32°F (0°C).
Specs
Regulatory Compliance – Chemlink DuraGlaze Plus Meets or Conforms to:
- OTC Rule for Sealants
- ASTM C920, Type S, Grade NS, Class 50,
Uses NT, T2, M, G, A & O - Federal Specification TT-S-00230-C Type II, Class A
- Corps of Engineers CRD-C-541, Type II, Class A
- California Regs: CARB, BAAQMD and SCAQMD
- Canadian Standards Board CAN 19, 13-M82
- USDA Requirements for Non-food Contact
- This product does not contain cancer causing
chemicals listed in California Proposition 65
Green Standards
- LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point.
- NAHB Model Green Home Building Guidelines: 5 Global Impact Points.
- VOC Content: less than 25 grams/liter ASTM D2369 EPA Method 24 (tested at 230°F/110°C).
Literature (click below for documents)
Installation
Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Isopropyl alcohol is an effective cleaner for surface preparation. Install all joint applications per ASTM and SWRI recommendations and guidelines. Please contact customer service for application guidelines for temperatures below 32 degrees F (0 degrees C). Maintain sealant at room temperature before application to ensure adequate tooling and adhesion. This product sets rapidly upon exposure to moisture.
