Rubio Monocoat Refresh Eco
Rubio Monocoat Refresh Eco is a ready-to-use sprayable product that refreshes and restores all wooden tables, worktops, and furniture that have been treated with oil.
- Easy for homeowners to use.
- Non-pigmented. If color restoration is necessary, renovate the surface using Oil Plus 2C in the original color with which the surface area was treated.
- Please note: this product is not suitable for floors or stairs. This product makes such surfaces too slippery.
| Spread Rate | ~1,000 ft²/L |
|---|---|
| Cure Time | 6 hours |
| VOC Content | 0% |
| Dilutable | No |
| Shelf Life | 12 months |
| Warning | Do not allow to freeze |
Please note: Calculations are estimates. Your results may vary based on species, water popping, sanding, etc.
1. Vacuum the surface. Remove dust, sand, grit, etc…
2. Clean the surface to be treated with Universal Soap or Surface Care (consult the TDS before use) and let dry.
3. Spray a small amount of Refresh Eco on the surface to be treated.
4. Spread out the product in the direction of the wood fibers with a microfiber cloth.
5. Let the surface dry for at least 1 hour before using the surface again.
Sizing guide
Rubio Monocoat Refresh Eco is a ready-to-use sprayable product that refreshes and restores all wooden tables, worktops, and furniture that have been treated with oil.
- Easy for homeowners to use.
- Non-pigmented. If color restoration is necessary, renovate the surface using Oil Plus 2C in the original color with which the surface area was treated.
- Please note: this product is not suitable for floors or stairs. This product makes such surfaces too slippery.
| Spread Rate | ~1,000 ft²/L |
|---|---|
| Cure Time | 6 hours |
| VOC Content | 0% |
| Dilutable | No |
| Shelf Life | 12 months |
| Warning | Do not allow to freeze |
Please note: Calculations are estimates. Your results may vary based on species, water popping, sanding, etc.
1. Vacuum the surface. Remove dust, sand, grit, etc…
2. Clean the surface to be treated with Universal Soap or Surface Care (consult the TDS before use) and let dry.
3. Spray a small amount of Refresh Eco on the surface to be treated.
4. Spread out the product in the direction of the wood fibers with a microfiber cloth.
5. Let the surface dry for at least 1 hour before using the surface again.