AFM Safecoat DuroStain Pro Very Low VOC Wood Stain
- Low Odor/Low 5g/l VOC
- Zero HAPs (Hazardous Air Pollutants)
- Fast curing low sheen finish semi-transparent stain for interior and exterior surfaces.
- Excellent, light fast pigmentation stability
- Superior, durable stain
- Safely used by and for the chemically sensitive
- Low odor, non-offensive to installer and occupant
-
Coverage: One gallon covers 400 square feet
Usage
Safecoat DuroStain is recommended for unsealed wooden surfaces. Note: staining large surfaces such as floors with a water-based stain requires significant expertise and is not recommended for the average user.Safecoat DuroStain Pro Benefits
- Excellent, light fast pigmentation stability
- Superior, durable stain
- Safely used by and for the chemically sensitive
- Low odor, non-offensive to installer and occupant
- Very low VOC content
- Meets or exceeds all Federal and State air quality regulations, including California
Sizes
1 quart, 1 gallon, and 2-ounce samplesCoverage
One gallon of Safecoat DuroStain covers approximately 400 square feet in one coat depending on surface porosity and the intensity of the stain color desired.More Information about AFM Safecoat DuroStain
Colors
Durostain is available in these colors:
Surface Preparation
Because of wide variations in the way different woods accept stain, we particularly recommend that users always test in small, inconspicuous areas for appearance and compatibility before application to the entire surface. Surfaces to be stained with Safecoat DuroStain should be sound and cleaned of dirt, dust, grease, wax, silicone, soap and oil, and must be completely free of mold, mildew or fungus contamination. Cleaning with an odorless, dye-free, all-purpose cleaner like SafeChoice Super Clean is recommended. Previously painted or sealed surfaces will not accept stain readily. Consequently, stripping of old paint or sealer followed by rinsing and sanding will be required before application of Safecoat DuroStain to achieve maximum penetration from this product. Surface can be dampened with water to assist user in getting an even application. Porous woods with strong grain pattern can be tamed by using thinned (50% with water) application of Safecoat DuroStain Clear. Safecoat DuroStain can be used as a glaze over painted and sealed surfaces.Application
Always have adequate ventilation. Before using, stir Safecoat DuroStain Pro well, then apply as is stirring occasionally during use.
Intermix (boxing) all containers of the same color to ensure uniformity before applying. Apply with the grain using a brush or pad applicator always keeping a wet edge. Make sure to wipe off any excess stain which does not penetrate into the wood.
Under normal conditions, Safecoat DuroStain Pro dries to touch in one hour and is re-coatable after two hours. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.
Note: these instructions are intended to be general only and not exhaustive.
The applicator should determine what preparation and techniques are best suited to the specific surface.
Clean Up
Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean or soap and warm water. To recycle or properly dispose of paint in your community call 1-800-CLEANUP (USA only) or visit www.Earth911.org.Click here for the DuroStain data sheet, including product limitations, health precautions, and AFM Safecoats limited liability.
- Weight N/A
- Size 1 Gallon, 1 Quart, 2 ounce sample
- Color Cedar, Golden Oak, Granite, Iron Wood, Mahogany, Maple, Nutmeg, Oak, Pecan, Pickled, Walnut
Sizing guide
- Low Odor/Low 5g/l VOC
- Zero HAPs (Hazardous Air Pollutants)
- Fast curing low sheen finish semi-transparent stain for interior and exterior surfaces.
- Excellent, light fast pigmentation stability
- Superior, durable stain
- Safely used by and for the chemically sensitive
- Low odor, non-offensive to installer and occupant
-
Coverage: One gallon covers 400 square feet
Usage
Safecoat DuroStain is recommended for unsealed wooden surfaces. Note: staining large surfaces such as floors with a water-based stain requires significant expertise and is not recommended for the average user.Safecoat DuroStain Pro Benefits
- Excellent, light fast pigmentation stability
- Superior, durable stain
- Safely used by and for the chemically sensitive
- Low odor, non-offensive to installer and occupant
- Very low VOC content
- Meets or exceeds all Federal and State air quality regulations, including California
Sizes
1 quart, 1 gallon, and 2-ounce samplesCoverage
One gallon of Safecoat DuroStain covers approximately 400 square feet in one coat depending on surface porosity and the intensity of the stain color desired.More Information about AFM Safecoat DuroStain
Colors
Durostain is available in these colors:
Surface Preparation
Because of wide variations in the way different woods accept stain, we particularly recommend that users always test in small, inconspicuous areas for appearance and compatibility before application to the entire surface. Surfaces to be stained with Safecoat DuroStain should be sound and cleaned of dirt, dust, grease, wax, silicone, soap and oil, and must be completely free of mold, mildew or fungus contamination. Cleaning with an odorless, dye-free, all-purpose cleaner like SafeChoice Super Clean is recommended. Previously painted or sealed surfaces will not accept stain readily. Consequently, stripping of old paint or sealer followed by rinsing and sanding will be required before application of Safecoat DuroStain to achieve maximum penetration from this product. Surface can be dampened with water to assist user in getting an even application. Porous woods with strong grain pattern can be tamed by using thinned (50% with water) application of Safecoat DuroStain Clear. Safecoat DuroStain can be used as a glaze over painted and sealed surfaces.Application
Always have adequate ventilation. Before using, stir Safecoat DuroStain Pro well, then apply as is stirring occasionally during use.
Intermix (boxing) all containers of the same color to ensure uniformity before applying. Apply with the grain using a brush or pad applicator always keeping a wet edge. Make sure to wipe off any excess stain which does not penetrate into the wood.
Under normal conditions, Safecoat DuroStain Pro dries to touch in one hour and is re-coatable after two hours. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.
Note: these instructions are intended to be general only and not exhaustive.
The applicator should determine what preparation and techniques are best suited to the specific surface.
Clean Up
Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean or soap and warm water. To recycle or properly dispose of paint in your community call 1-800-CLEANUP (USA only) or visit www.Earth911.org.Click here for the DuroStain data sheet, including product limitations, health precautions, and AFM Safecoats limited liability.
- Weight N/A
- Size 1 Gallon, 1 Quart, 2 ounce sample
- Color Cedar, Golden Oak, Granite, Iron Wood, Mahogany, Maple, Nutmeg, Oak, Pecan, Pickled, Walnut