ChemLink DuraLink 50 Adhesion Sealant
$151.93
/
Advantages of ChemLink DuraLink 50
- +/- 50% joint movement.
- Bonds to Kynar 500® PVDF coated metal.
- Solvent free, 100% solids will not shrink.
- Non-slump, applies vertically and overhead.
- 30 minute skin over.
- No outgassing on damp surfaces.
- Color stability, will not suntan.
- Paintable within 24 hours (See limitations).
Duralink 50 is for up to 50% joint movement!
See Duralink 35 for up to 35% joint movement
ChemLink DuraLink 50 Super Adhesion Sealant
Chemlink DuraLink 50 is a moisture-curing super-adhesion sealant that cures quickly to form a soft rubber seal. DuraLink is designed for use with many building materials including Kynar 500® PVDF coated metals, glass, EIFS, galvanized steel, masonry, and many other common building materials.DuraLink is SWR Institute validated for +/-50% joint movement. DuraLink is an extremely elastic moisture-curing sealant designed for use in metal architecture, curtain wall construction, and joints subject to movement. DuraLinks adhesion to difficult surfaces permits its use on anodized metal and coatings such as Kynar 500® PVDF.
DuraLink will not stain absorbent stone substrates like limestone or marble. DuraLinks unique polyether chemistry eliminates out-gassing on green concrete and protects against "sun tanning" or discoloration when exposed to ultraviolet light.
Compatible Substrates
- Kynar 500® PVDF Coated Metal
- Brick, Concrete, and Stone
- Galvanized Metal
- EPDM and SBS Mod Bit
- Aluminum
- EPS Foam
- Engineered Plastics, PVC
- B.U.R (Built-up Roofing)
- Glass
- Fiberglass FRP
- James Hardie Board
- Vinyl Siding
Basic Uses
- Window and door frames
- Siding
- Pre-cast concrete
- Weather Sealing
- Block and Masonry
- Cove Joints
- Curtain Walls
- Parapets
- Expansion joints
- Transportation
Available Sizes
- Carton of 24 - 10.1 oz cartridges (F1260 - all colors normally in stock)
- Carton of 12 - 28.0 oz cartridges (F1210 - only Gray - special order)
- Carton of 12 - 20.0 oz sausages (F1261 - most colors in stock, others made-to-order)
- 2-gallon pail, 5-gallon pail, and 50-gallon drum are made-to-order
Color
- White, Gray, Black, Stone, Tan, Almond, Limestone, Dark Bronze, Terra Cotta, Aluminum Gray, Medium Bronze, Forrest Green, Weathered Wood.
Regulatory Compliance
- Conforms to OTC Rule for Sealants.
- Meets requirements of California Regs: CARB, BAAQMD, and SCAQMD.
- Conforms to California Proposition 65.
- Conforms to USDA Requirements for Non-food Contact.
Green Standards
- LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point.
- NAHB Model Green Home Building Guidelines: 5 Global Impact Points.
- VOC Content: less than 19 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F / 115°C).
- Technical Data Sheet
- Chemlink Duralink 50 SDS
- Chemlink Duralink 50 Product Page
Chemlink Duralink 50 Installation
Bonding surfaces should be clean, dry, and free from all contamination that may inhibit the sealant's performance. Isopropyl alcohol is an effective cleaner for surface preparation. Install all joint applications per ASTM and SWRI recommendations and guidelines.
Please contact customer service for application guidelines for temperatures below 32 degrees F (0 degrees C). Maintain sealant at room temperature before application to ensure adequate tooling and adhesion. This product sets rapidly upon exposure to moisture.
- Weight 25 lbs
- Color Almond, Aluminum Gray, Black, Dark Bronze, Forest Green, Gray, Limestone, Medium Bronze, Stone, Tan, Terra Cotta, Weathered Wood, White
- Chemlink 10.1oz cartridge (case of 24), 20oz sausage (case of 12), 28oz cartridge (case of 12)
Advantages of ChemLink DuraLink 50
- +/- 50% joint movement.
- Bonds to Kynar 500® PVDF coated metal.
- Solvent free, 100% solids will not shrink.
- Non-slump, applies vertically and overhead.
- 30 minute skin over.
- No outgassing on damp surfaces.
- Color stability, will not suntan.
- Paintable within 24 hours (See limitations).
Duralink 50 is for up to 50% joint movement!
See Duralink 35 for up to 35% joint movement
ChemLink DuraLink 50 Super Adhesion Sealant
Chemlink DuraLink 50 is a moisture-curing super-adhesion sealant that cures quickly to form a soft rubber seal. DuraLink is designed for use with many building materials including Kynar 500® PVDF coated metals, glass, EIFS, galvanized steel, masonry, and many other common building materials.DuraLink is SWR Institute validated for +/-50% joint movement. DuraLink is an extremely elastic moisture-curing sealant designed for use in metal architecture, curtain wall construction, and joints subject to movement. DuraLinks adhesion to difficult surfaces permits its use on anodized metal and coatings such as Kynar 500® PVDF.
DuraLink will not stain absorbent stone substrates like limestone or marble. DuraLinks unique polyether chemistry eliminates out-gassing on green concrete and protects against "sun tanning" or discoloration when exposed to ultraviolet light.
Compatible Substrates
- Kynar 500® PVDF Coated Metal
- Brick, Concrete, and Stone
- Galvanized Metal
- EPDM and SBS Mod Bit
- Aluminum
- EPS Foam
- Engineered Plastics, PVC
- B.U.R (Built-up Roofing)
- Glass
- Fiberglass FRP
- James Hardie Board
- Vinyl Siding
Basic Uses
- Window and door frames
- Siding
- Pre-cast concrete
- Weather Sealing
- Block and Masonry
- Cove Joints
- Curtain Walls
- Parapets
- Expansion joints
- Transportation
Available Sizes
- Carton of 24 - 10.1 oz cartridges (F1260 - all colors normally in stock)
- Carton of 12 - 28.0 oz cartridges (F1210 - only Gray - special order)
- Carton of 12 - 20.0 oz sausages (F1261 - most colors in stock, others made-to-order)
- 2-gallon pail, 5-gallon pail, and 50-gallon drum are made-to-order
Color
- White, Gray, Black, Stone, Tan, Almond, Limestone, Dark Bronze, Terra Cotta, Aluminum Gray, Medium Bronze, Forrest Green, Weathered Wood.
Regulatory Compliance
- Conforms to OTC Rule for Sealants.
- Meets requirements of California Regs: CARB, BAAQMD, and SCAQMD.
- Conforms to California Proposition 65.
- Conforms to USDA Requirements for Non-food Contact.
Green Standards
- LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point.
- NAHB Model Green Home Building Guidelines: 5 Global Impact Points.
- VOC Content: less than 19 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F / 115°C).
- Technical Data Sheet
- Chemlink Duralink 50 SDS
- Chemlink Duralink 50 Product Page
Chemlink Duralink 50 Installation
Bonding surfaces should be clean, dry, and free from all contamination that may inhibit the sealant's performance. Isopropyl alcohol is an effective cleaner for surface preparation. Install all joint applications per ASTM and SWRI recommendations and guidelines.
Please contact customer service for application guidelines for temperatures below 32 degrees F (0 degrees C). Maintain sealant at room temperature before application to ensure adequate tooling and adhesion. This product sets rapidly upon exposure to moisture.
- Weight 25 lbs
- Color Almond, Aluminum Gray, Black, Dark Bronze, Forest Green, Gray, Limestone, Medium Bronze, Stone, Tan, Terra Cotta, Weathered Wood, White
- Chemlink 10.1oz cartridge (case of 24), 20oz sausage (case of 12), 28oz cartridge (case of 12)