ChemLink BuildSecure Multi-Purpose Construction Adhesive (24-Pack)
-
Chemlink BuildSecure is a high solids, solvent-free, no odor, fast-setting polyether-based adhesive specially designed for bonding most construction materials including: wood studs, galvanized steel framing, aluminum framing, rafters, subfloors, drywall, gypsum, concrete, cove, fiberglass, FPO panels, ceiling systems, EIFS, EPS, and polyurethane foams
- Fast settings, high adhesion, solvent free, non-flammable.
- 100% VOC compliant.
- Tough elastomeric bonds.
- Non-carcinogenic.
Chemlink BuildSecure Multi-Purpose Construction Adhesive
Chemlink BuildSecure is a fast setting structural adhesive designed for various "panel on frame" assemblies in commercial and residential construction. Chemlink Build Secure can achieve wood tearing bonds in less than four hours at 72°F (22°C). The speed of set and ultimate shear strength make Chemlink Build Secure ideal for shear wall construction and roof assemblies in a production setting where timing is of critical importance.
The "green strength" and ultimate 400+ PSI shear strength, of this adhesive permits floor decks, shear-walls and roof assemblies to be bonded to each other, forming a rigid "airframe" type construction with strength in all directions. Chemlink BuildSecure is capable of filling gaps and forming bonds on irregular surfaces without shrinking.
Chemlink BuildSecure is a solvent free, non-flammable, moisture curing adhesive. It complies with all OSHA, State, Local and Federal air quality regulations. This adhesive is non-carcinogenic and complies with California Proposition 65.
Chemlink BuildSecure Compatible Substrates
- Galvanized Metal
- Aluminum
- Engineered Plastics, PVC
- Expanded Polystyrene (EPS)
- Fiberglass FRP
- Wood
- EPS Foam
- Drywall
- Gypsum
Basic Uses
- Bonding conforming subfloor structures.
- Bonding roof and wall sheathing to wood and metal stud.
- Installing EPS foam insulation.
- Wood to metal assemblies.
- Installing cabinetry and sink tops.
- Installing “tack strip†to secure carpeting.
- Structural insulated panels (SIPs).
- Gap filling or bridging.
- Tan
- 10.1 oz cartridges (carton of 24)
- 20 oz sausages (carton of 12)
- 28 oz cartridges (carton of 12)
- 2 gallon pail
- 5 gallon pail
Chemlink BuildSecure Construction Adhesive Advantages
- Fast settings, high adhesion, solvent free, non-flammable.
- 100% VOC compliant.
- Tough elastomeric bonds.
- Non-carcinogenic.
Regulatory Compliance
- Conforms to OTC Rule for Adhesives.
- Meets requirements of California regulations: CARB, SCAQMD and BAAQMD.
- Conforms to California Proposition 65.
- Conforms to USDA requirements for non-food contact.
Green Standards
- LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) eligible for 1 Point.
- NAHB Model Green Home Building Guidelines: 5Â Global Impact Points.
- VOC Content: less than 32 grams/liter: ASTM D2369 / EPA Method 24 at 240°F (includes water).
Literature
- Weight 25 lbs
- Size 12-28oz Cartridges, 24-10.1oz Cartridges
){kind=link}
Sizing guide
-
Chemlink BuildSecure is a high solids, solvent-free, no odor, fast-setting polyether-based adhesive specially designed for bonding most construction materials including: wood studs, galvanized steel framing, aluminum framing, rafters, subfloors, drywall, gypsum, concrete, cove, fiberglass, FPO panels, ceiling systems, EIFS, EPS, and polyurethane foams
- Fast settings, high adhesion, solvent free, non-flammable.
- 100% VOC compliant.
- Tough elastomeric bonds.
- Non-carcinogenic.
Chemlink BuildSecure Multi-Purpose Construction Adhesive
Chemlink BuildSecure is a fast setting structural adhesive designed for various "panel on frame" assemblies in commercial and residential construction. Chemlink Build Secure can achieve wood tearing bonds in less than four hours at 72°F (22°C). The speed of set and ultimate shear strength make Chemlink Build Secure ideal for shear wall construction and roof assemblies in a production setting where timing is of critical importance.
The "green strength" and ultimate 400+ PSI shear strength, of this adhesive permits floor decks, shear-walls and roof assemblies to be bonded to each other, forming a rigid "airframe" type construction with strength in all directions. Chemlink BuildSecure is capable of filling gaps and forming bonds on irregular surfaces without shrinking.
Chemlink BuildSecure is a solvent free, non-flammable, moisture curing adhesive. It complies with all OSHA, State, Local and Federal air quality regulations. This adhesive is non-carcinogenic and complies with California Proposition 65.
Chemlink BuildSecure Compatible Substrates
- Galvanized Metal
- Aluminum
- Engineered Plastics, PVC
- Expanded Polystyrene (EPS)
- Fiberglass FRP
- Wood
- EPS Foam
- Drywall
- Gypsum
Basic Uses
- Bonding conforming subfloor structures.
- Bonding roof and wall sheathing to wood and metal stud.
- Installing EPS foam insulation.
- Wood to metal assemblies.
- Installing cabinetry and sink tops.
- Installing “tack strip†to secure carpeting.
- Structural insulated panels (SIPs).
- Gap filling or bridging.
- Tan
- 10.1 oz cartridges (carton of 24)
- 20 oz sausages (carton of 12)
- 28 oz cartridges (carton of 12)
- 2 gallon pail
- 5 gallon pail
Chemlink BuildSecure Construction Adhesive Advantages
- Fast settings, high adhesion, solvent free, non-flammable.
- 100% VOC compliant.
- Tough elastomeric bonds.
- Non-carcinogenic.
Regulatory Compliance
- Conforms to OTC Rule for Adhesives.
- Meets requirements of California regulations: CARB, SCAQMD and BAAQMD.
- Conforms to California Proposition 65.
- Conforms to USDA requirements for non-food contact.
Green Standards
- LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) eligible for 1 Point.
- NAHB Model Green Home Building Guidelines: 5Â Global Impact Points.
- VOC Content: less than 32 grams/liter: ASTM D2369 / EPA Method 24 at 240°F (includes water).
Literature
- Weight 25 lbs
- Size 12-28oz Cartridges, 24-10.1oz Cartridges