AFM Safecoat Penetrating WaterStop Zero VOC Interior/Exterior Sealant
Product Features
- Zero VOC
- Interior and Exterior use
- Water-resistant for up to 5 years
- Non film forming
- Bonds to Brick walls, concrete foundations, stucco, stone and most unglazed tile
- Apply with brush or spray equipment evenly
- Safely used by and for the chemically sensitive.
Safecoat Penetrating WaterStop Zero VOC Interior/Exterior Sealant
Safecoat Penetrating WaterStop is a Zero VOC interior/exterior sealant that improves water resistance and repellency in a wide variety of surfaces including: brick walls, concrete foundations, stucco, stone and most unglazed tile.
Interior & Exterior Usage
Safecoat Penetrating WaterStop is low odor, non-toxic, is ideal for use indoors instead of a typical high solvent content sealer; yet, it is durable enough for use outdoors. It is particularly useful as a periodic maintenance coat for surfaces originally treated with AFM Safecoat WaterShield water-repelling sealer.
Safecoats Penetrating WaterStop No-VOC Water Proofing
This product contains no volatile organic compounds and is a non-toxic sealant.Usage
Porous, mineral-containing surfaces such as brick, pavers, concrete block and other cementious materials, stone and stucco. Not suitable for wood.Advantages & Benefits of Safecoats Non-Toxic Penetrating WaterStop Sealant
- Good water resistance for up to 5 years when properly applied.
- Low odor, non-offensive to installer and occupant.
- Safely used by and for the chemically sensitive.
- Fights indoor air pollution.
- Zero VOC sealant
- Meets or exceeds all Federal and State air quality regulations, including California.
- Contains no formaldehyde.
Sizes
- 1 gallon.
- 5 gallon.
Coverage
Most surfaces, 200-300 square feet per gallon. Natural limestone, 300-500 square feet per gallon.
Surface Preparation
All surfaces must be clean, dry, free from dirt, dust, efflorescence, grease, wax, oil, silicone, tsp/soap, mill scale, oxidation, loose peeling paint or varnish, or any foreign matter/contaminants. Remove all mildew before coating any surface with Penetrating WaterStop.
Clean Up
Clean tools and equipment while still wet with a solution of SafeChoice Super Clean and warm water. Drying/curing time is 24 hours full cure in moderate humidity and heat.
Limitations
Unlike conventional sealers, Safecoat sealers are made without formaldehyde preservatives, toxic mildewicides, and fungicides. Do not contaminate. Store in airtight containers. Do not use when indoor or surface temperature is below 55 degrees F. Do not freeze. Do not apply where product will be immersed in water, such as fountains, pools or below ground areas.
Health Precautions
As will all coatings and sealers, keep the container tightly closed and out of the reach of children. Do not take internally. Always use adequate ventilation. If you are chemically sensitive, always test for personal tolerance.
Limited Liability
Safecoat products are guaranteed not to be defective when properly applied. Liability expressed or implied is limited to replacement of product or refund of purchase price and does not include liability for labor costs or consequential damages. Variable factors out of manufacturer's control, such as environmental conditions, application techniques, and surface conditions are critical to the results obtained. Users are expected to exercise reasonable care to determine the suitability of the product for each application. This limited warranty may not be modified or extended by the manufacturer's representatives, distributors, or dealers of AFM products. Always test in small, inconspicuous areas before application to the entire surface.
More Information about AFM Safecoat Penetrating WaterStop Sealant
- Weight 19.8 lbs
- Size 1 Gallon, 5 Gallon
Sizing guide
Product Features
- Zero VOC
- Interior and Exterior use
- Water-resistant for up to 5 years
- Non film forming
- Bonds to Brick walls, concrete foundations, stucco, stone and most unglazed tile
- Apply with brush or spray equipment evenly
- Safely used by and for the chemically sensitive.
Safecoat Penetrating WaterStop Zero VOC Interior/Exterior Sealant
Safecoat Penetrating WaterStop is a Zero VOC interior/exterior sealant that improves water resistance and repellency in a wide variety of surfaces including: brick walls, concrete foundations, stucco, stone and most unglazed tile.
Interior & Exterior Usage
Safecoat Penetrating WaterStop is low odor, non-toxic, is ideal for use indoors instead of a typical high solvent content sealer; yet, it is durable enough for use outdoors. It is particularly useful as a periodic maintenance coat for surfaces originally treated with AFM Safecoat WaterShield water-repelling sealer.
Safecoats Penetrating WaterStop No-VOC Water Proofing
This product contains no volatile organic compounds and is a non-toxic sealant.Usage
Porous, mineral-containing surfaces such as brick, pavers, concrete block and other cementious materials, stone and stucco. Not suitable for wood.Advantages & Benefits of Safecoats Non-Toxic Penetrating WaterStop Sealant
- Good water resistance for up to 5 years when properly applied.
- Low odor, non-offensive to installer and occupant.
- Safely used by and for the chemically sensitive.
- Fights indoor air pollution.
- Zero VOC sealant
- Meets or exceeds all Federal and State air quality regulations, including California.
- Contains no formaldehyde.
Sizes
- 1 gallon.
- 5 gallon.
Coverage
Most surfaces, 200-300 square feet per gallon. Natural limestone, 300-500 square feet per gallon.
Surface Preparation
All surfaces must be clean, dry, free from dirt, dust, efflorescence, grease, wax, oil, silicone, tsp/soap, mill scale, oxidation, loose peeling paint or varnish, or any foreign matter/contaminants. Remove all mildew before coating any surface with Penetrating WaterStop.
Clean Up
Clean tools and equipment while still wet with a solution of SafeChoice Super Clean and warm water. Drying/curing time is 24 hours full cure in moderate humidity and heat.
Limitations
Unlike conventional sealers, Safecoat sealers are made without formaldehyde preservatives, toxic mildewicides, and fungicides. Do not contaminate. Store in airtight containers. Do not use when indoor or surface temperature is below 55 degrees F. Do not freeze. Do not apply where product will be immersed in water, such as fountains, pools or below ground areas.
Health Precautions
As will all coatings and sealers, keep the container tightly closed and out of the reach of children. Do not take internally. Always use adequate ventilation. If you are chemically sensitive, always test for personal tolerance.
Limited Liability
Safecoat products are guaranteed not to be defective when properly applied. Liability expressed or implied is limited to replacement of product or refund of purchase price and does not include liability for labor costs or consequential damages. Variable factors out of manufacturer's control, such as environmental conditions, application techniques, and surface conditions are critical to the results obtained. Users are expected to exercise reasonable care to determine the suitability of the product for each application. This limited warranty may not be modified or extended by the manufacturer's representatives, distributors, or dealers of AFM products. Always test in small, inconspicuous areas before application to the entire surface.
More Information about AFM Safecoat Penetrating WaterStop Sealant
- Weight 19.8 lbs
- Size 1 Gallon, 5 Gallon