Sale!
TileSecure_cartridge_label
TileSecure Applied

ChemLink TileSecure Roof Tile Adhesive (24-Pack)

5 out of 5 based on 1 customer rating
(1 customer review)

$113.83

  • Solvent free, 100% solids, will not shrink.
  • No outgassing on damp surfaces.
  • Paintable within 24 hours.
  • Can be applied at temperatures down to 32°F (0°C).
  • Non-Slump, applies vertically and overhead.
  • Very good color stability, will not suntan.
  • Non-carcinogenic.
Clear

Product Description

Description

TileSecure Roof Tile Adhesive & Sealant

TileSecure Roof Tile Adhesive is a high-performance, moisture-curing polyether adhesive, formulatedTileSecure Applied for installation and repair of clay, composite, concrete, and slate roof tiles. TileSecure is a one component, ready to use adhesive formulated to install and repair a variety of natural and synthetic roof tiles.

TileSecure is UV resistant, 100% solids, contains very low VOC’s and no California Proposition 65 listed materials. The non-sag, quick setting formulation is especially designed for roof tiles, valley and edge tiles, wall tiles and the repair of broken tiles. TileSecure may be painted and will provide a long lasting adhesive seal.

Compatible Substrates

  • Masonry.
  • Stone.
  • Roof Tile.
  • Aluminum & Galvanized Metal.
  • Wood.
  • EPS Foam.

Size:

carton of 24 – 10.1 oz plastic cartridge.

Colors:

  • Medium Bronze.
  • Stone.
  • Terra Cotta.
  • Gray.
  • Black.
  • Tan.

Specs

Advantages

  • Solvent free, 100% solids, will not shrink.
  • No outgassing on damp surfaces.
  • Paintable within 24 hours.
  • Can be applied at temperatures down to 32°F (0°C).
  • Non-Slump, applies vertically and overhead.
  • Very good color stability, will not suntan.
  • Non-carcinogenic.

Green Standards

  • LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point.
  • NAHB Model Green Home Building Guidelines: 5 Global Impact Points.
  • VOC Content: less than 25 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F/115°C).

Regulatory Compliance

  • Conforms to OTC Rule for Adhesives.
  • Meets requirements of California Regs: CARB and SCAQMD.
  • Conforms to California Proposition 65.
  • Conforms to USDA Requirements for non-food contact.

Applicable Performance Standards

  • ASTM C920, Type S, Grade NS, Class 35, Uses NT, T2, M, G, A, and O.
  • Federal Specification TT-S-00230-C Type II, Class B.
  • Corps of Engineers CRD-C-541, Type II, Class B.
  • Canadian Standards Board Can 19, 13-M82.

Literature

Additional Information

Weight 25.2
Color

Black, Gray, Medium Bronze, Terra Cotta, Stone, Tan

1 review for ChemLink TileSecure Roof Tile Adhesive (24-Pack)

  1. 5 out of 5

    :

    I was thrilled to see how well the Chemlink TileSecure Adhesive matched the color of my terracotta roof tiles.

Add a review

Your email address will not be published. Required fields are marked *