AFM Safecoat Dynoseal Roof Sealant
Quick Info:
- Created for the chemically sensitive with no harmful chemicals
- Flexible waterproof coating
- Soap and water clean-up
- Recoat after 2 hours, cures in 24 hours.
USE ON:
Seamless roofs and as a deck coating and underlayment for shower stalls, pools, tubs and saunas. It is recommended for use in repairing roofs, flashing, shingles, metal seams, and as a vapor barrier against moisture from below-grade foundations.
LIMITATIONS:
Safecoat sealers are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use in temperatures below 55 degrees F. Do not freeze. Thick application, high humidity, or conditions other than normal will cause Safecoat to dry and cure more slowly.
SURFACE PREPARATION:
Clean surfaces of dirt, grease, mildew, and oil. The surface should be completely dry before application.
APPLICATION:
Before application stir Safecoat DynoSeal, then apply with a brush or 3/8” roller. Roof and deck coating: 2 coats. Below grade application: 4 coats.
Safecoat DynoSeal is not meant to be exposed to the elements for extended periods of time. It should be top-coated with Safecoat RoofGuard. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine which preparation and techniques are best suited to the specific surface.
CLEAN-UP:
Clean tools and equipment with a warm soapy water solution.
DRYING/CURING TIME:
Re-coatable after 2 hours in normal conditions. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. The temperature should remain above 45 degrees F for two days to allow full curing. Surface remains tacky to the touch after drying.
HEALTH PRECAUTIONS:
As with all natural sealers and coatings, keep the container tightly closed and out of the reach of children. Do not take it internally. Keep from freezing. Always use adequate ventilation.
PHYSICAL DATA
Physical Description: Low odor, mildly
alkaline, black % Volatile by Volume: 50.18%
Solubility in Water: Dilutable % Volatile by Weight: 49.23%
VOC Material: 19 g/l
VOC Material less H20: 36 g/l
HAP’s (Hazardous Air Pollutants) zero
- Weight N/A
- Size 1 Gallon, 5 Gallon
Sizing guide
Quick Info:
- Created for the chemically sensitive with no harmful chemicals
- Flexible waterproof coating
- Soap and water clean-up
- Recoat after 2 hours, cures in 24 hours.
USE ON:
Seamless roofs and as a deck coating and underlayment for shower stalls, pools, tubs and saunas. It is recommended for use in repairing roofs, flashing, shingles, metal seams, and as a vapor barrier against moisture from below-grade foundations.
LIMITATIONS:
Safecoat sealers are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use in temperatures below 55 degrees F. Do not freeze. Thick application, high humidity, or conditions other than normal will cause Safecoat to dry and cure more slowly.
SURFACE PREPARATION:
Clean surfaces of dirt, grease, mildew, and oil. The surface should be completely dry before application.
APPLICATION:
Before application stir Safecoat DynoSeal, then apply with a brush or 3/8” roller. Roof and deck coating: 2 coats. Below grade application: 4 coats.
Safecoat DynoSeal is not meant to be exposed to the elements for extended periods of time. It should be top-coated with Safecoat RoofGuard. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine which preparation and techniques are best suited to the specific surface.
CLEAN-UP:
Clean tools and equipment with a warm soapy water solution.
DRYING/CURING TIME:
Re-coatable after 2 hours in normal conditions. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. The temperature should remain above 45 degrees F for two days to allow full curing. Surface remains tacky to the touch after drying.
HEALTH PRECAUTIONS:
As with all natural sealers and coatings, keep the container tightly closed and out of the reach of children. Do not take it internally. Keep from freezing. Always use adequate ventilation.
PHYSICAL DATA
Physical Description: Low odor, mildly
alkaline, black % Volatile by Volume: 50.18%
Solubility in Water: Dilutable % Volatile by Weight: 49.23%
VOC Material: 19 g/l
VOC Material less H20: 36 g/l
HAP’s (Hazardous Air Pollutants) zero
- Weight N/A
- Size 1 Gallon, 5 Gallon