AFM Safecoat Caulking Compound Case of 12

$120.65

Quick Info:

  • Premium quality low VOC
  • Created for the Chemically sensitive
  • No solvents no harsh odors
  • Interior and Exterior use
  • 10.1 oz tubes
  • Dry time: Drys to skin over in 1-2 hours cures in 24 hours

AFM Safecoat Caulking Compound is a not-toxic, indoor-outdoor flexible emulsion type of caulking compound is designed to replace oil caulk and putty for windows, cracks, tub and shower enclosures and general maintenance. It will not dry out or crack and does not release any solvents or harsh odors. Provides a water-proof, easy-to-install sealant with excellent initial and permanent adhesion.

LIMITATIONS:

AFM Safecoat Caulking Compound is made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor temperature is below 55 degrees F. Do not freeze. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

SURFACE PREPARATION:

Prime and seal surfaces completely before application of caulk to protect against undue absorption into substrate.  All surfaces to receive caulk and overlays must be sound, intact and cleaned of any grease, oils, dust, dirt, wax, unsound prior caulk and other foreign materials.

APPLICATION:

Apply Safecoat Multi-Purpose Caulk directly from tube or container with no dilution. If working from bulk container, apply with a pastry decorating bag, bulk caulking gun or mortar joint filler. Install firmly into opening and joints pressing to insure contact with faces. Tool with knife or spatula to smooth and level the sealant surface using rubbing alcohol.

CLEAN-UP:

Clean tools and equipment while they are still wet with rubbing alcohol.

DRYING/CURING TIME:

 

Under normal conditions, 24 hours for full cure. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees Fahrenheit. HEALTH PRECAUTIONS:

As with all coatings and sealers, keep container tightly closed and out of the reach of children.

Do not take internally. Keep from freezing. Always use adequate ventilation.

PHYSICAL DATA

Boiling Point: NA

Melting Point: N/A

Volatile by Volume: 0%

% Volatile by Weight: 0%

VOC Material: Less than 19

g/l @240˚

  • Weight 12 lbs
  • Size Case of 12 – 10.1 oz. Tubes

We ship AFM Safecoat products from two super-busy warehouses. Please give us at least 72 hours to package and handle your order. Once UPS has your package, we can speed things up with overnight, next-day, or second-day shipping. Just reach out and let us know, so we can set it up and figure out the extra cost. Give us a call at 231.399.0900 Ext. 1 or email Sales@Eco-BuildingProducts.Com.

Size
  • ARBOR DAY
  • Best Small Business Award
  • Customer Reviews
Vendors: AFM safecoat SKU: 71830-12
  • Easy Returns

    Easy Returns

    Return within 30 days of purchase date

  • Technical Support

    Technical Support

    Available 9am - 5pm EST Mon-Fri

  • Customer Support

    Customer Support

    Available 9am - 5pm EST, Mon-Fri

  • Fast Shipping

    Fast Shipping

    Ships within 48 hours if in stock

AFM Safecoat Caulking Compound is a not-toxic, indoor-outdoor flexible emulsion type of caulking compound is designed to replace oil caulk and putty for windows, cracks, tub and shower enclosures and general maintenance. It will not dry out or crack and does not release any solvents or harsh odors. Provides a water-proof, easy-to-install sealant with excellent initial and permanent adhesion.

LIMITATIONS:

AFM Safecoat Caulking Compound is made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor temperature is below 55 degrees F. Do not freeze. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

SURFACE PREPARATION:

Prime and seal surfaces completely before application of caulk to protect against undue absorption into substrate.  All surfaces to receive caulk and overlays must be sound, intact and cleaned of any grease, oils, dust, dirt, wax, unsound prior caulk and other foreign materials.

APPLICATION:

Apply Safecoat Multi-Purpose Caulk directly from tube or container with no dilution. If working from bulk container, apply with a pastry decorating bag, bulk caulking gun or mortar joint filler. Install firmly into opening and joints pressing to insure contact with faces. Tool with knife or spatula to smooth and level the sealant surface using rubbing alcohol.

CLEAN-UP:

Clean tools and equipment while they are still wet with rubbing alcohol.

DRYING/CURING TIME:

 

Under normal conditions, 24 hours for full cure. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees Fahrenheit.HEALTH PRECAUTIONS:

As with all coatings and sealers, keep container tightly closed and out of the reach of children.

Do not take internally. Keep from freezing. Always use adequate ventilation.

PHYSICAL DATA

Boiling Point: NA

Melting Point: N/A

Volatile by Volume: 0%

% Volatile by Weight: 0%

VOC Material: Less than 19

g/l @240˚

  • Weight 12 lbs
  • Size Case of 12 – 10.1 oz. Tubes

It’s a non-toxic, flexible emulsion caulk designed to replace oil-based caulk and putty for sealing windows, cracks, tub and shower enclosures, and general maintenance.

Yes. It’s formulated for both interior and exterior applications and maintains flexibility without drying out or cracking.

  • Solvent-free and low odor
  • Will not release harsh fumes
  • Provides excellent initial and long-term adhesion
  • Water-resistant and easy to apply

Yes. It’s designed with health-conscious users in mind, but sensitivity testing is always recommended.

  • Clean surfaces thoroughly
  • Remove dust, grease, and old caulk
  • Ensure surfaces are dry and stable
  • Test a small area for adhesion if needed

Use a standard caulking gun to apply. Smooth with a damp finger or tool. Avoid over-application and ensure even coverage.

Coverage varies by bead size, but a 10.1 oz tube typically yields 25 linear feet at a 0.25" bead.

  • Skins over in minutes
  • Full cure typically within 24 hours under normal conditions
  • Ideal conditions: dry surface, moderate humidity, and temperatures above 55°F
  • Use within six months of purchase
  • Do not freeze
  • Store in airtight containers
  • Avoid use below 40°F

Keep out of reach of children. Do not ingest. Use adequate ventilation and avoid skin contact.

  • Appearance: White paste, low odor
  • VOC: Very low
  • HAPs: Zero
  • Non-flammable and non-toxic