Attic Insulation Covers for Recessed Lights
Insulated attic light covers offer a cost-effective solution for improving energy efficiency around recessed lights, an often under-insulated area of the attic where heat escapes. Features include:
- Fire-rated components: Made with temperature-resistant materials (-60°F to 180°F).
- Easy Installation: Quick setup, no special tools required.
- Energy Efficient: Prevents heat loss and stops air leakage.
- Universal Fit: Covers most round recessed lights and bath fans.
The Insulated Attic Light Cover by SEALIN' HATCH
The Insulated Attic Light Covers by SEALIN' HATCH is a quick, simple, and cost-effective solution for keeping all types of insulation material away from the typical recessed light and bath fan. It has been field-proven to be an E-Z install! The top is made with 75% recycled material.
Benefits- Manufactured with fire-rated components.
- Easily covers most round new and existing recess lights.
- Designed to keep insulation material 3" from the standard round recess light.
- Saves valuable energy and stops air leakage.
- Improves comfort and stops heat loss or heat gain.
- Reduces noise.
- Saves time, quick and straightforward installation
- Improves safety: Installers spend less time in hot and potentially unsafe attic environments.
- Substantially improves insulation-weatherization crew productivity.
- Eliminates homeowner complaints and costly callbacks caused by buried lights cycling on/off and dirt and insulation fiber infiltrating the light fixture.
Note that the box of 20 will also result in the best shipping cost per unit.
Installation Notes- Make sure bulb wattage does not exceed the fixture manufacturer's limit
- Center Light Cover on the light fixture
- May be neatly cut to fit around wires, fixtures, and joists, where necessary
- Bottoms need to be flush with the attic floor surface
- Some installers seal or stick the Light Covers down with a foam caulk (if so, let set before installing insulation) - Or, hold them down flush to the attic floor surface and install insulation around and over the Cap.
Even though these attic caps, assembled by Sealin' Hatch, do not have an ASTM rating, the material they are made does. Sealin' Hatch attic insulated recessed light covers are made from Temp Shield Single Bubble Double Foil, the second column in the first row of the document below. Note: Temp Shield has a contact temperature range of -60 degrees F to 180 degrees F, which is a Class A/Class 1 Fire rating. Sealin Hatch insulated recessed light covers are built to perform!
Click here for a PDF document verifying Temp Shields' performance. Please feel free to call or email with any questions or concerns.- Weight 1.5 lbs
- Dimensions 1 — 1 — 1 in
- Pricing Individual Caps, Set of 16, Set of 20
Insulated attic light covers offer a cost-effective solution for improving energy efficiency around recessed lights, an often under-insulated area of the attic where heat escapes. Features include:
- Fire-rated components: Made with temperature-resistant materials (-60°F to 180°F).
- Easy Installation: Quick setup, no special tools required.
- Energy Efficient: Prevents heat loss and stops air leakage.
- Universal Fit: Covers most round recessed lights and bath fans.
The Insulated Attic Light Cover by SEALIN' HATCH
The Insulated Attic Light Covers by SEALIN' HATCH is a quick, simple, and cost-effective solution for keeping all types of insulation material away from the typical recessed light and bath fan. It has been field-proven to be an E-Z install! The top is made with 75% recycled material.
Benefits- Manufactured with fire-rated components.
- Easily covers most round new and existing recess lights.
- Designed to keep insulation material 3" from the standard round recess light.
- Saves valuable energy and stops air leakage.
- Improves comfort and stops heat loss or heat gain.
- Reduces noise.
- Saves time, quick and straightforward installation
- Improves safety: Installers spend less time in hot and potentially unsafe attic environments.
- Substantially improves insulation-weatherization crew productivity.
- Eliminates homeowner complaints and costly callbacks caused by buried lights cycling on/off and dirt and insulation fiber infiltrating the light fixture.
Note that the box of 20 will also result in the best shipping cost per unit.
Installation Notes- Make sure bulb wattage does not exceed the fixture manufacturer's limit
- Center Light Cover on the light fixture
- May be neatly cut to fit around wires, fixtures, and joists, where necessary
- Bottoms need to be flush with the attic floor surface
- Some installers seal or stick the Light Covers down with a foam caulk (if so, let set before installing insulation) - Or, hold them down flush to the attic floor surface and install insulation around and over the Cap.
Even though these attic caps, assembled by Sealin' Hatch, do not have an ASTM rating, the material they are made does. Sealin' Hatch attic insulated recessed light covers are made from Temp Shield Single Bubble Double Foil, the second column in the first row of the document below. Note: Temp Shield has a contact temperature range of -60 degrees F to 180 degrees F, which is a Class A/Class 1 Fire rating. Sealin Hatch insulated recessed light covers are built to perform!
Click here for a PDF document verifying Temp Shields' performance. Please feel free to call or email with any questions or concerns.- Weight 1.5 lbs
- Dimensions 1 — 1 — 1 in
- Pricing Individual Caps, Set of 16, Set of 20