Solatube 10" Diameter Skylight Kit for High Velocity Hurricane Zones (160DS) with two 20" Extension Tubes
Protect your home without sacrificing natural light with Solatube skylights engineered specifically for High Velocity Hurricane Zones (HVHZ) along the Gulf Coast and Atlantic Coast. Our hurricane skylights meet stringent Florida Building Code requirements and deliver brilliant natural illumination to homes across Florida, Texas, Louisiana, North Carolina, South Carolina, and other southeast states vulnerable to high wind conditions.
Hurricane-Rated Tubular Skylights for Extreme Weather
Solatube HVHZ tubular skylights feature impact-resistant construction with an inner shock dome designed to withstand missile impact testing, flying debris, and sustained winds exceeding 120 mph. Unlike traditional flat roof skylights that can fail during storms, our tubular skylight systems passed rigorous testing by the Hurricane Test Laboratory in Riviera Beach, Florida, where lumber was shot at high speed directly at the dome to simulate hurricane conditions.
Available in both the 160 DS (10-inch) model for spaces up to 200 square feet and the 290 DS (14-inch) low profile skylights model for areas up to 300 square feet, these Solatube skylights install in just 2 hours with no structural modifications required. The sealed system design prevents water intrusion even during intense Gulf Coast and Atlantic Coast storms common to hurricane-prone regions.
Advanced Low Profile Skylight Technology
Our HVHZ low profile skylights incorporate patented Raybender® 3000 Technology and LightTracker™ Reflector that capture low-angle morning and evening sunlight for consistent solar tube lighting throughout the day. The unique low profile sunlight collector technology works seamlessly with flat roof skylights applications, making them ideal for modern Gulf states and southeast states architecture.
Captured daylight transfers through Spectralight® Infinity Tubing—Solatube International's proprietary material with 99.7% reflectivity—ensuring maximum light delivery even through long vertical runs and corners. This solar tubing technology outperforms conventional skylight tube products by maintaining brightness from rooftop to ceiling without degradation.
Complete Protection for Storm-Prone Regions
Each hurricane skylight system includes impact-rated components specifically engineered for the demanding conditions found in Florida, Texas, Louisiana, and coastal areas of North Carolina and South Carolina. The double-dome construction with inner shock dome provides extra impact protection against hail, wind-driven debris, and the extreme forces that characterize high wind events along the Gulf Coast and Atlantic Coast.
Solatube International designed these solar tube skylights to eliminate heat transfer while delivering pure natural light—a critical feature for southeast states where summer temperatures and humidity demand energy-efficient solar light tubes. The advanced dome technology blocks harmful UV radiation and prevents the thermal gain that makes traditional skylights impractical in hot, humid climates.
Customizable Options for Gulf States Homes
Choose from Classic or Architect Series diffuser fixtures in round or square configurations to match your home's aesthetic while enjoying code-compliant solar tube lighting. Optional features include Daylight Dimmer Systems for brightness control, integrated solar-powered NightLights for 24-hour illumination, and ventilation add-ons—all engineered to HVHZ specifications.
The leak-proof flashing system works with any roof type common to Gulf states and southeast states construction, including tile, shingle, metal, and low-slope or flat roof skylights applications. Each Solatube skylight installation includes professional mounting hardware rated for hurricane zones, ensuring your investment remains secure through multiple storm seasons.
Energy Efficiency Meets Storm Protection
Unlike conventional solar tubes skylights, our HVHZ-rated tubular skylights reduce daytime electricity dependency by providing bright natural illumination without operational costs. Homeowners across Florida, Texas, Louisiana, North Carolina, and South Carolina report significant energy savings while maintaining full code compliance for high wind zones.
The sealed solar tubing design prevents air infiltration and moisture intrusion—essential performance characteristics for humid Gulf Coast climates where traditional flat roof skylights often fail. Every component meets or exceeds Solatube International's rigorous standards for durability, weather resistance, and long-term performance in extreme southeast states conditions.
When code compliance and storm protection are non-negotiable, Solatube HVHZ skylights deliver the perfect combination of hurricane skylight engineering and brilliant solar light tubes performance for homes throughout America's high wind regions.
Key Features
-
Hurricane Zone Approved: Meets all hurricane zone requirements.
-
Advanced Dome Technology: Captures low-angle sunlight from morning to evening to provide steady, radiant brightness all day.
-
Patented 99% Reflective Tubing: Maximizes light transfer for exceptional illumination in every corner of your home.
-
Elegant Ceiling Fixtures: Diffuses daylight beautifully, creating a soft, natural glow unmatched by artificial lighting.
Why Choose the Solatube 160DS
- Installs in as little as 2 hours.
- Requires no major structural changes to your home.
- Includes FREE shipping.
- Reduces energy usage for an eco-friendly, sustainable lighting solution.
- Brings in natural daylight without added heat.
- Provides superior light quality that enhances comfort, focus, and overall health.
Upgrade your home with the Solatube 160DS HVHZ tubular skylight—experience natural daylight, exceptional efficiency, and lasting comfort.
Value Added Accessories
Found in the ACCESSORY TAB, there are 9 accessories that can be purchased to upgrade to any existing Solatube Skylight Kit.
Roof Flashing add-ons for Metal and Clay tile roofs:
Extension Tube Information
-
No pitch metal flashing kit does not include extension tubes. It spans about 21", so your system will likely need at least one 20" extension tube.
-
Pitched Metal Flashing kit has two 20" extension tubes so its extension tubes will span about 62”.
-
No Tubes: This option is for those with about 18-20" between the ceiling and roof. This is rare. We recommend purchasing at least one 20" extension tube to make connecting the roof deck penetration and the ceiling penetration less difficult.
No pitch metal flashing is used on roofs with little to no pitch. Flat roofs and roofs with pitches between 0:12 and 3:12 The tubes attached to the top dome (known as Angle Adapter Tubes) on your roof and the light diffuser in your ceiling are 12.5" in length. They're called angel adapter tubes because they can angle up to 45 degrees after they have penetrated the plane. So the start of your sun tunnel can be pointed toward the other penetration, which may not be located directly above or below its corresponding penetration.
The total length of the two tubes and each angle adapter tube depends on the thickness of the roof deck and the ceiling. On average, these two angel adapter tubes provide for about 20" of tubing to connect to one another. If your roof deck penetration is greater than 20" from your ceiling penetration, we recommend that you purchase either a 20" extension tubes, or a 24" 0-90° to elbow (for navigating around rafters and/or other obstacles) to connect the two tubes together.
-
20" Extension Tubes: To aid in connecting the two penetration points between your roof and ceiling if the distance is greater than the extension tubes that our included in the kit you have purchased.
Diffuser "Ceiling Fixture" Information:
-
Solatube Diffuser Options: Get the type of daylight you desire with the diffuser of your choice. The Vusion Diffuser (Included in basic kit). However, you may choose to upgrade any one of the following options:
- JustFrost Diffuser
- Tier Drop Diffuser
- AuroroGlo (Bronze)
- AuroraGlo (White)
Solatube Light Add On Kit: When equipped with a light add on kit, the Solatube Daylighting System provides the convenience of a switched light for night time use. Adding a light to your Solatube means you will always have the light you need. Available in Compact Fluorescent and Incandescent. Bulbs are sold separately. Light Add-on Kits do not include extension tubes. Bulbs are 23W (4-pin connector) for Compact fluorescent and 100W for Incandescent kits.
Solatube Ventilation Add-On Kit: (Roof Vent Cap sold separately): The Solatube 160DS is available with an optional Ventilation Add-On Kit designed for exceptional style and performance. Combined with this innovative accessory, the 2-in-1 ceiling fixture minimizes ceiling penetrations for a more attractive look. Proprietary technology uses twin fan motors with opposing rotations to overcome static pressure and increase the speed and volume of airflow. The in-line fan motors can be mounted away from the ceiling fixtures for quieter performance. Blends with any decor.
Solatube Daylight Dimmer: (Dimmer switch sold separately): You don’t need 100% of the light 100% of the time. The innovative Solatube Daylight Dimmer easily controls the amount of light desired in any room from a Solatube skylight. Designed for maximum comfort and ease of use, adjust the desired light level from the convenience of a switch.
Solatube Thermal Insulation Panel: In Cold Climates the thermal insulation panel keeps cold out to reduce heat loss and in warm climates, prevents heat build up wich improves energy efficiency and reduces cooling loads.
Warm effects Lense: The ideal way to make any room feel cozier and more welcoming! This lens lets you turn the natural sunlight coming in into a soft, warm glow that’s super comforting.
Solatube Diffuser Options Solatube Diffusers are the components visible on your ceiling. The Brighten Up® Series provides several diffuser options that use special lenses to spread light broadly and efficiently. Each one has a slim, low-profile trim ring. Compatible with all Solatube Daylighting systems manufactured after 2011, these cool, modern Solatube diffusers blend smoothly into ceilings without visible screws.
Solatube JustFrost Square Diffuser: Upgrade your Solatube diffuser from the Round to the new Square design. Includes JustFrost Square Diffuser.
Solatube Bottom Tube Upgrade Kit: An aesthetically designed space, the JustFrost Square Decorative fixture illuminates your interior with natural sunlight.
Solatube Metal Roof Installation Kit: Metal Roof Installation Kit for use with Solatube Metal Flashing 10" diameter (160DS) or 14" diameter (290DS). Kit includes butyl tape and additional hardware.
Solatube Universal Tile Flashing: The ideal way to make any room feel cozier and more welcoming! This lens lets you turn the natural sunlight coming in into a soft, warm glow that’s super comforting.
20" Extension Tubes: To aid in connecting the two penetration points between your roof and ceiling if the distance is greater than the extension tubes that our included in the kit you have purchased.
90° Elbow Extension Tube: Intended to navigate around obstacles between the two penetrations like rafters or trusses.
%20Skylight%20for%20Hurricane%20Zones%20Kit%20with%20two%2020%22%20Ext.%20Tubes){kind=link}