ChemLink DuraGlaze Plus Sealant

ChemLink DuraGlaze Plus Sealant

Chemlink DuraGlaze Plus Sealant is a premium grade, extremely elastic, high-performance, moisture-cure sealant designed for use in fenestrations (perimeter sealing windows, doors and panels), curtain wall construction and joints subject to movement. With an extended “tack-free” time in elevated temperatures, Chemlink DuraGlaze Plus Sealant is an ideal product for any project. Chemlink DuraGlaze Plus Sealant adheres to “difficult to bond surfaces” and is suitable for use on anodized metal and coatings such as Kynar 500® PVDF. DuraGlaze Plus has a unique polyether chemistry which eliminates any possibility of out-gassing and protects against “sun tanning” or discoloration when exposed to ultraviolet light.

Features

Bonds to Kynar 500® PVDF coated metalSolvent free, 100% solids — will not shrinkNon-slump, applies vertically and overhead60-90 minute skin overLow dirt pickupColor stability — will not stainCan be applied to damp surfaces — will not outgasThicker consistency designed based on professional installer feedbackPaintable within 24 hoursService temperature -40°F to 200°F (-40°C to 93°C)Packaged in plastic cartridges and foil sausagesEasy to gun and tool, speeding up applicationExtended “tack-free” time in elevated temperaturesMeets all state and federal VOC regulationsMade in the USA — ISO 9001:2015 certified

Available Sizes

• Carton of 24 - 10.1 oz cartridges
• Carton of 12 - 20 ounce sausages

Stock Colors

• Gray
• White
• Architectural Dark Bronze

	10.1oz Cartridge - case of 24	20oz Sausage - case of 12
White	F1267WH	F1269WH
Gray	F1267GR	F1269GR
Architectural Dark Bronze	F1267ABR	F1269ABR

Applications

• Window And Door Frames
• Pre-cast Concrete
• Block And Masonry
• Curtain Walls
• Expansion Joints
• Storefront Systems
• Weather Sealing
• Cove Joints
• arapets
• Air Infiltration Sealant

Compatible Substrates

• Anodized aluminum
• Kynar 500® PVDF Coated Metal
• Galvanized Metal
• Aluminum
• Brick
• Concrete
• Stone
• Wood
• Glass
• Fiberglass FRP
• Engineered Plastics
• Vinyl Siding
• EPS Foam

Limitations

In areas where prolonged chemical exposure is anticipated, contact Technical Services for recommendations. Allow treated wood to “cure” for six months prior to application per APA guidelines. Do not use in areas subject to continuous immersion. Do not store in elevated temperatures. Remove all coatings and sealers before application. If product is to be painted, test and evaluate before application. Polyurethane and oil-based paints may dry slowly. Please contact customer service for application guidelines with temperatures below 32°F (0°C).

Regulatory Compliance - Chemlink DuraGlaze Plus Meets or Conforms to:

• OTC Rule for Sealants
• ASTM C920, Type S, Grade NS, Class 50,
  Uses NT, T2, M, G, A & O
• Federal Specification TT-S-00230-C Type II, Class A
• Corps of Engineers CRD-C-541, Type II, Class A
• California Regs: CARB, BAAQMD and SCAQMD
• Canadian Standards Board CAN 19, 13-M82
• USDA Requirements for Non-food Contact
• This product does not contain cancer causing
  chemicals listed in California Proposition 65

Green Standards

• LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point.
• NAHB Model Green Home Building Guidelines: 5 Global Impact Points.
• VOC Content: less than 25 grams/liter ASTM D2369 EPA Method 24 (tested at 230°F/110°C).

Literature (click below for documents)

• DuraGlaze Plus Technical Data Sheet
• DuraGlaze Plus SDS
• DuraGlaz Plus Brochure
• Chemlink's DuraGlaze Plus Product Page

Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Isopropyl alcohol is an effective cleaner for surface preparation. Install all joint applications per ASTM and SWRI recommendations and guidelines. Please contact customer service for application guidelines for temperatures below 32 degrees F (0 degrees C). Maintain sealant at room temperature before application to ensure adequate tooling and adhesion. This product sets rapidly upon exposure to moisture.

• Weight 25 lbs
• Size 12-20oz Sausages, 24-10.1oz Cartridges
• Color Architectural Dark Bronze, Gray, White