AFM Safecoat AcriGlaze Interior/Exterior Finish

$6.60

This special mixing medium and finish is suitable for use even in the display, art, and show fields. It is mildew-resistant, odorless, and dries clear. Ideal for restoring old finishes to their original brilliance, sealing and preserving painted work, faux finishing, and as an adhesive for paper mache.

Safecoat AcriGlaze Low-VOC Clear Glaze & Mixing Medium

Safecoat AcriGlaze is a special mixing medium and finish suitable for use in the display, art and show fields. It is mildew-resistant, odorless and dries clear. AcriGlaze is ideal for restoring old finishes to their original brilliance, sealing and preserving painted work, faux finishing and as an adhesive for paper mache. Available in gloss and matte sheen.

Safecoat AcriGlaze provides a clear finish for masonry, brick, plaster, wood, paneling etc., where a soft, low-luster finish and sealer is desired. May be used both interior or exterior as a reducer for any type of water-based paint. Excellent medium for artist colors and universal tints.

Sheens

  • Matte.
  • Gloss.

Sizes

  • 1 quart.
  • 1 gallon.

Coverage

One gallon of Safecoat AcriGlaze covers approximately 200-400 square feet in one coat depending on the method of application and surface porosity.

Drying/Curing Time

Under normal conditions, Safecoat AcriGlaze dries to touch in one hour and is recoatable after four hours. Normal conditions include a clean, dry surface, access to fresh air flow, a dust-free environment, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity, or conditions other than normal will cause Safecoat AcriGlaze to dry and cure more slowly.

Clean-Up

Clean tools and equipment while still wet with a solution of SafeChoice Super Clean and warm water.

Thinning

None required, water if needed.

Surface Preparation

All surfaces must be clean, dry, and free from dirt, dust, grease, efflorescence, loose peeling, or chalking paint. Dull glossy surfaces by sanding or washing with a solution of SafeChoice® Super Clean followed by a clear water rinse. Remove all mold and mildew and thoroughly clean followed by water rinsing. Remove efflorescence by washing with a 10% solution of muriatic acid and brushing, followed by washing. Repair all holes, cracks, etc. with an appropriate patching material. Do not apply over oil-based materials without first testing for compatibility.

Application

Always use adequate ventilation. Intermix (boxing) all containers of the same sheen to ensure gloss uniformity before applying. Before using, mix the coating thoroughly by gently stirring or rolling container to avoid air bubbles. Be sure to stir the product thoroughly every 20 minutes during application. Do not shake container. Pour material to be used into another container before applying coating to avoid contaminating main container. Use a short nap roller or nylon brush. Spray any large masonry exterior surfaces. Care should be taken to avoid over-agitation as it creates bubbles. Apply as a clear varnish as supplied. Two or three coats of gloss finish AcryGlaze will provide a wet look and offer better water resistance. Do not use when air or surface temperature is below 50ºF. Applying over oil-based paints and mediums may cause product to yellow; test on an inconspicuous area before doing large surface. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine which preparation and techniques are best suited to the specific surface.

Limitations

Unlike conventional coatings, Safecoat is made without formaldehyde preservatives or toxic mildewcides or fungicides. Do not contaminate. Store in airtight containers. Do not use when indoor or surface temperature is below 55°F. Do not apply where product will be immersed in water, such as fountains, pools or below ground area. Do not freeze.

Health Precautions

As with all coatings and stains, keep container tightly closed and out of the reach of children. Do not take internally. Always use adequate ventilation. Wear a mask when sanding and avoid breathing sanding dust. Avoid contact with skin and eyes and avoid breathing of spray vapors and spray mist. If you are chemically sensitive, always test for personal tolerance.

Limited Liability

Safecoat products are guaranteed not to be defective when properly applied. Liability express or implied is limited to replacement of product or refund of purchase price and does not include liability for labor costs or consequential damages. Variable factors out of manufacturer's control, such as environmental conditions, application techniques, and surface conditions are critical to results obtained. Users are expected to exercise reasonable care to determine suitability of the product for each application. This limited warranty may not be modified or extended by manufacturer's representatives, distributors or dealers of AFM products. We particularly recommend that users always test in small inconspicuous areas before applying to the entire surface.

More Information about AFM Safecoat Acriglaze

Spec sheet

MSDS

  • Weight 0.1 lbs
  • Size 1 Gallon, 1 Quart, 2 ounce sample
  • Sheen Gloss, Matte


Scroll down for more information
Size
Sheen
Vendors: AFM safecoat SKU: 1827P
  • 5
    355 (89.4%)
  • 4
    27 (6.8%)
  • 3
    10 (2.5%)
  • 2
    2 (0.5%)
  • 1
    3 (0.8%)
96% of customers rate this company 4- or 5-stars
Newest to Oldest
  • Favorite Reviews
  • Highest to Lowest
  • Newest to Oldest
All Ratings
  • All Ratings
  • 5 ★ Reviews
  • 4 ★ Reviews
  • 3 ★ Reviews
  • 2 ★ Reviews
  • 1 ★ Reviews
Delbert H. Verified Customer
01-08-25

I going by what i see on the web site to be what I need thank you. see

Kevin K. Verified Customer
01-07-25

Great product

Bea D. Verified Customer
01-03-25

I have purchased this product before and we are very pleased with the eco-friendly use of it!

Daniel M. Verified Customer
01-02-25

Easy site to navigate

Lissa J. Verified Customer
12-28-24

Nice to find non fiberglass insulation.

John, I. Verified Customer
12-28-24

Their rep was great, so I took a chance: Because of product design change, the replacement unit did not work for us (my bad for taking the chance). Would have appreciated Eco-Products providing a return label, even if I had to pay for their shipping rate for the return. After a 20% restocking fee & USPS shipping (far less than FedEx or UPS), will net only about 25% return of original cost, and I paid the original shipping to our home.

Beatrice D. Verified Customer
12-24-24

Received order as promised and I can give a 5 star rating on easy to install - DIY project. I would love for a disturbutor to carry the batts locally in Texas! I love the product because it is safe and easy to install and for the insulation R factor is Awesome!

Ben Verified Customer
12-24-24

Fantastic products, quick delivery and great customer service! Thanks again!!!

Jean O. Verified Customer
12-23-24

Following a very frustrating attempt to order from a different green flooring business, I ordered Marmoleum flooring through Josh at Eco-Building Products. He was very straightforward with answers to my questions & very helpful when some of the flooring arrived damaged in shipment. This is part of my follow-up email to him: "Thank you so much for all your personal patience & help with my order & extended thanks to Eco-Building Products for providing environmentally friendly items at great prices & for being so ethical, reliable & customer oriented." Dealing with Eco-Building Products was definitely a good experience & I would happily order from them again.

Duwaine R. Verified Customer
12-20-24

Thanks for the Forbo Bulletin Board!

slide 2 of 50

This special mixing medium and finish is suitable for use even in the display, art, and show fields. It is mildew-resistant, odorless, and dries clear. Ideal for restoring old finishes to their original brilliance, sealing and preserving painted work, faux finishing, and as an adhesive for paper mache.

Safecoat AcriGlaze Low-VOC Clear Glaze & Mixing Medium

Safecoat AcriGlaze is a special mixing medium and finish suitable for use in the display, art and show fields. It is mildew-resistant, odorless and dries clear. AcriGlaze is ideal for restoring old finishes to their original brilliance, sealing and preserving painted work, faux finishing and as an adhesive for paper mache. Available in gloss and matte sheen.

Safecoat AcriGlaze provides a clear finish for masonry, brick, plaster, wood, paneling etc., where a soft, low-luster finish and sealer is desired. May be used both interior or exterior as a reducer for any type of water-based paint. Excellent medium for artist colors and universal tints.

Sheens

  • Matte.
  • Gloss.

Sizes

  • 1 quart.
  • 1 gallon.

Coverage

One gallon of Safecoat AcriGlaze covers approximately 200-400 square feet in one coat depending on the method of application and surface porosity.

Drying/Curing Time

Under normal conditions, Safecoat AcriGlaze dries to touch in one hour and is recoatable after four hours. Normal conditions include a clean, dry surface, access to fresh air flow, a dust-free environment, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity, or conditions other than normal will cause Safecoat AcriGlaze to dry and cure more slowly.

Clean-Up

Clean tools and equipment while still wet with a solution of SafeChoice Super Clean and warm water.

Thinning

None required, water if needed.

Surface Preparation

All surfaces must be clean, dry, and free from dirt, dust, grease, efflorescence, loose peeling, or chalking paint. Dull glossy surfaces by sanding or washing with a solution of SafeChoice® Super Clean followed by a clear water rinse. Remove all mold and mildew and thoroughly clean followed by water rinsing. Remove efflorescence by washing with a 10% solution of muriatic acid and brushing, followed by washing. Repair all holes, cracks, etc. with an appropriate patching material. Do not apply over oil-based materials without first testing for compatibility.

Application

Always use adequate ventilation. Intermix (boxing) all containers of the same sheen to ensure gloss uniformity before applying. Before using, mix the coating thoroughly by gently stirring or rolling container to avoid air bubbles. Be sure to stir the product thoroughly every 20 minutes during application. Do not shake container. Pour material to be used into another container before applying coating to avoid contaminating main container. Use a short nap roller or nylon brush. Spray any large masonry exterior surfaces. Care should be taken to avoid over-agitation as it creates bubbles. Apply as a clear varnish as supplied. Two or three coats of gloss finish AcryGlaze will provide a wet look and offer better water resistance. Do not use when air or surface temperature is below 50ºF. Applying over oil-based paints and mediums may cause product to yellow; test on an inconspicuous area before doing large surface. Note: these instructions are intended to be general only and not exhaustive. The applicator should determine which preparation and techniques are best suited to the specific surface.

Limitations

Unlike conventional coatings, Safecoat is made without formaldehyde preservatives or toxic mildewcides or fungicides. Do not contaminate. Store in airtight containers. Do not use when indoor or surface temperature is below 55°F. Do not apply where product will be immersed in water, such as fountains, pools or below ground area. Do not freeze.

Health Precautions

As with all coatings and stains, keep container tightly closed and out of the reach of children. Do not take internally. Always use adequate ventilation. Wear a mask when sanding and avoid breathing sanding dust. Avoid contact with skin and eyes and avoid breathing of spray vapors and spray mist. If you are chemically sensitive, always test for personal tolerance.

Limited Liability

Safecoat products are guaranteed not to be defective when properly applied. Liability express or implied is limited to replacement of product or refund of purchase price and does not include liability for labor costs or consequential damages. Variable factors out of manufacturer's control, such as environmental conditions, application techniques, and surface conditions are critical to results obtained. Users are expected to exercise reasonable care to determine suitability of the product for each application. This limited warranty may not be modified or extended by manufacturer's representatives, distributors or dealers of AFM products. We particularly recommend that users always test in small inconspicuous areas before applying to the entire surface.

More Information about AFM Safecoat Acriglaze

Spec sheet

MSDS

  • Weight 0.1 lbs
  • Size 1 Gallon, 1 Quart, 2 ounce sample
  • Sheen Gloss, Matte