Vermont Natural Coatings PolyWhey® EZ-PRO Wood Floor Finish
Vermont Natural Coatings' PolyWhey EZ-PRO Wood Floor Finish is a water-based finish recommended for all residential and light commercial interior hardwood floors. Neutral odor, great coverage, quick-drying, easy cleanup, and long life make PolyWhey EZ-PRO an economical choice when selecting an environmentally-friendly and durable finish. Exceptionally smooth and easy to use, EZ-PRO is “The Roller’s Choice”.
- Single component. No limited pot life, no wasted finish
- Excellent flow and leveling
- Complies with all US and Canadian VOC regulations
- Fast drying and curing allows up to 3 coats in a single day
- Available in matte, satin, and semi-gloss
Surface preparation: Sand and prepare floor using NWFA industry standards. Vacuum and wipe surface clean prior to coating.
Recommended applicators: T-bar, roller, or painters pad.
Application:
Stir and shake finish before applying. Pour a 2″ bead of finish near the starting wall. Use a dampened T-bar sleeve, roller sleeve or painters pad and pull the finish with the grain of the wood. Maintain a wet edge at all times. Feather out all turns. Avoid moving too quickly and maintain steady, medium pressure to avoid applicator drips. Allow the first coat to dry 2 hours. High humidity and/or low temperature conditions may increase dry time. For best results, apply in temps between 65°F-80°F with a relative humidity of 40%-60%. Up to 4 oz. of water per gallon may be added for variable application conditions.
Covers approximately 600-700 square feet per gallon
Sizing guide
Vermont Natural Coatings' PolyWhey EZ-PRO Wood Floor Finish is a water-based finish recommended for all residential and light commercial interior hardwood floors. Neutral odor, great coverage, quick-drying, easy cleanup, and long life make PolyWhey EZ-PRO an economical choice when selecting an environmentally-friendly and durable finish. Exceptionally smooth and easy to use, EZ-PRO is “The Roller’s Choice”.
- Single component. No limited pot life, no wasted finish
- Excellent flow and leveling
- Complies with all US and Canadian VOC regulations
- Fast drying and curing allows up to 3 coats in a single day
- Available in matte, satin, and semi-gloss
Surface preparation: Sand and prepare floor using NWFA industry standards. Vacuum and wipe surface clean prior to coating.
Recommended applicators: T-bar, roller, or painters pad.
Application:
Stir and shake finish before applying. Pour a 2″ bead of finish near the starting wall. Use a dampened T-bar sleeve, roller sleeve or painters pad and pull the finish with the grain of the wood. Maintain a wet edge at all times. Feather out all turns. Avoid moving too quickly and maintain steady, medium pressure to avoid applicator drips. Allow the first coat to dry 2 hours. High humidity and/or low temperature conditions may increase dry time. For best results, apply in temps between 65°F-80°F with a relative humidity of 40%-60%. Up to 4 oz. of water per gallon may be added for variable application conditions.
Covers approximately 600-700 square feet per gallon