Vents-US Series Vents TwinFresh Comfo RA1-50-2
- Motor type: DC
- Enthalpy heat exchanger
- Control: Wired control panel
- Casing material: Plastic
- Humidity sensor: Built-in
Single Room ERV units
THE MOST INNOVATIVE VENTILATION FOR BUILDINGS UNDER CONSTRUCTION AND RENOVATION
Replace Your Mechanical Ventilation with TwinFresh Comfo
BENEFITS:
- Unique Single Room Energy Recovery Ventilator
- Efficient supply and exhaust ventilation up to 30 CFM
- Sensible Recovery Efficiency up to 88 %
- Reversible DC motors with low energy demand from 4.50 W
- Efficacy 2.14 CFM/W – twice as high as the Energy Star requirements
- Multifunctional wireless remote control
- Silent operation from 0.2 Sones
- Stainless steel outer hood:
- Easy mounting and maintenance
- Air purification with total MERV 5 filters
- Rated for continuous operation
- Frost- and condensate-free
- Modern design that fits any exterior
- 100% corrosion proof
IN WINTER AND SUMMER
Random cracks or opening a window lets cooler fresh air into the house but at the same time it lets the heated air out. This ventilation method increases both furnace load and your heating bills.
In cold season, TwinFresh recovers energy from the exhausted air to pre-treat the air entering the house. It not only helps to save on energy cost but also reduces the load placed on the furnace.
In summer, warm and humid air enters the house through cracks or open windows and the air-conditioned air is exhausted to the outdoors. This increases air conditioner load and your conditioning bills.
TwinFresh ERV supplies fresh, pre-cooled air indoors and exhausts stale air outdoors while recovering energy, which lowers the load on the HVAC unit as well as your energy bill.
| TwinFresh Comfo | Regular ERV | |
| No | Ductwork required | Yes |
|---|---|---|
| No | Dust collection inside a ductwork | Yes |
| No | Complicated wiring of the controls | Yes |
| No | Balancing is required | Yes |
| No | Professional installers are needed | Yes |
| No | Additional interior works to hide ducts | Yes |
| No | Separate room for installation | Yes |
| No | Antifreeze protection for core | Yes |
| ≤ 88 % | Sensible Recovery Efficiency | ≤ 80 % |
| 0.2-0.5 | Sones/Sound level | 3 |
ON TWINFRESH COMFO
|
One TwinFresh Comfo
unit in ventilation mode can serve rooms up to 500 sq.ft* |
To arrange a ventilation system based on TwinFresh Comfo ventilators, install one unit in each room. For larger premises, install two ventilators. Units can operate independently or can be wired for Primary - Secondary operation.
Air flows from one room to another through door grilles, openings or halls and ensures required circulation in premises.
*In accordance with ANSI/ASHRAE Standard 62.2-2016
| Lineup Vents TwinFresh Comfo RA1-50-2 | ||
|---|---|---|
 Vents TwinFresh Comfo RA1-50-2
|
Downloads
PDF
TwinFresh Comfo RA1-50-2 - image 1
- Motor type: DC
- Enthalpy heat exchanger
- Control: Wired control panel
- Casing material: Plastic
- Humidity sensor: Built-in
Single Room ERV units
THE MOST INNOVATIVE VENTILATION FOR BUILDINGS UNDER CONSTRUCTION AND RENOVATION
Replace Your Mechanical Ventilation with TwinFresh Comfo
BENEFITS:
- Unique Single Room Energy Recovery Ventilator
- Efficient supply and exhaust ventilation up to 30 CFM
- Sensible Recovery Efficiency up to 88 %
- Reversible DC motors with low energy demand from 4.50 W
- Efficacy 2.14 CFM/W – twice as high as the Energy Star requirements
- Multifunctional wireless remote control
- Silent operation from 0.2 Sones
- Stainless steel outer hood:
- Easy mounting and maintenance
- Air purification with total MERV 5 filters
- Rated for continuous operation
- Frost- and condensate-free
- Modern design that fits any exterior
- 100% corrosion proof
IN WINTER AND SUMMER
Random cracks or opening a window lets cooler fresh air into the house but at the same time it lets the heated air out. This ventilation method increases both furnace load and your heating bills.
In cold season, TwinFresh recovers energy from the exhausted air to pre-treat the air entering the house. It not only helps to save on energy cost but also reduces the load placed on the furnace.
In summer, warm and humid air enters the house through cracks or open windows and the air-conditioned air is exhausted to the outdoors. This increases air conditioner load and your conditioning bills.
TwinFresh ERV supplies fresh, pre-cooled air indoors and exhausts stale air outdoors while recovering energy, which lowers the load on the HVAC unit as well as your energy bill.
| TwinFresh Comfo | Regular ERV | |
| No | Ductwork required | Yes |
|---|---|---|
| No | Dust collection inside a ductwork | Yes |
| No | Complicated wiring of the controls | Yes |
| No | Balancing is required | Yes |
| No | Professional installers are needed | Yes |
| No | Additional interior works to hide ducts | Yes |
| No | Separate room for installation | Yes |
| No | Antifreeze protection for core | Yes |
| ≤ 88 % | Sensible Recovery Efficiency | ≤ 80 % |
| 0.2-0.5 | Sones/Sound level | 3 |
ON TWINFRESH COMFO
|
One TwinFresh Comfo
unit in ventilation mode can serve rooms up to 500 sq.ft* |
To arrange a ventilation system based on TwinFresh Comfo ventilators, install one unit in each room. For larger premises, install two ventilators. Units can operate independently or can be wired for Primary - Secondary operation.
Air flows from one room to another through door grilles, openings or halls and ensures required circulation in premises.
*In accordance with ANSI/ASHRAE Standard 62.2-2016
| Lineup Vents TwinFresh Comfo RA1-50-2 | ||
|---|---|---|
|
Vents TwinFresh Comfo RA1-50-2
|
Downloads
PDF