Sealin' Hatch Insulated Ceiling Attic Access Door
Insulated Attic Access Door - Pre-Built, Easily Installed, Insulated Attic Hatch:
- R39 meets most building codes
- R26 version for garages
- Built to fit standard on-center framing dimensions (16" or 24" on-center), though you can also add framing to fit non-standard spaces
- Actual box size is slightly smaller than rough opening dimensions to provide 1/4" gap - you will want shims on hand to shim in place for fastening
- For an insulated attic access door through a knee wall, go here.
- Here is this product's Specification Sheet
-
Click here to read about framing for attic access
-
Easy Returns
Return with 30 days of purchase date -
Technical Support
Available 9am - 5pm EST Mon-Fri -
Customer Support
Available 9am - 5pm EST, Mon-Fri -
Fast Shipping
Ships within 48 hours if in stock
Insulated Attic Access Door - Pre-Built, Easily Installed, Insulated Attic Hatch:
- R39 meets most building codes
- R26 version for garages
- Built to fit standard on-center framing dimensions (16" or 24" on-center), though you can also add framing to fit non-standard spaces
- Actual box size is slightly smaller than rough opening dimensions to provide 1/4" gap - you will want shims on hand to shim in place for fastening
- For an insulated attic access door through a knee wall, go here.
- Here is this product's Specification Sheet
-
Click here to read about framing for attic access
Sealin' Hatch Insulated Attic Access Door
Sealin' Hatch Insulated Attic Access Door is a completely assembled and insulated attic access system specifically designed to save the builder and homeowner time, energy, and money when building, remodeling, or simply adding attic access for maintenance.
Attic access doors from Sealin' Hatch are installed into a rectangular opening in your ceiling, between and mounted to ceiling joists. Pre-built out-of-the-box just insert it into the properly sized opening and shim it in place until you can fasten it to the joists.
To enter the attic, push the insulated panel up into the attic and to the side. When exiting the attic, slide the insulated panel back over the opening and down into the hatch framing where it will rest snugly in place with gravity.
Insulated Attic Access Door Features
- Ideal for New Builds & Remodels
- No Assembly Required
- No Rough Framing Needed
- Environmentally safe 75% Recycled Fiber Insulation
- R-39 Insulation Comes Pre-Attached (or see R26 version for garages)
- Energy Saving Weather Stripping
- Energy Star Standards
- 12" Loose-fill Insulation Dam (shorter for garage version)
- Sturdy Construction
- Pre-primed Trim and Door Panel - ready to (sand and) Paint after Installation
- Installs with just 6 screws (Included)
- Made in the USA
Click here for the Knee-Wall version: Sealin' Hatch Insulated Knee-Wall Hatch
Insulated Attic Access Door - Sizes and R-Values
- 14 1/2" x 22 1/2" rough opening size. R-39. It fits between true 16" and 24" on-centered ceiling joists or 14.5" rough opening (you will want to have shims on hand for shimming in place into a 14 1/2" rough opening). Can be turned to fit between 24" on-centered ceiling joists.
- 22 1/2" x 30 1/2" rough opening size. R-39. Meets building code for size.
- 22 1/2" x 30 1/2" rough opening size. R-26. Meets code for size and fire for attached garage installations or for sheds, garages, or attic areas that require less R-value/insulation.
- Here is this product's Specification Sheet
This article demonstrates locating and cutting the hole in the ceiling into which the attic hatch can be installed: DIY Attic Access
- Weight N/A
- Dimensions N/A
- Size 14.0" x 22.5" R39, 22.5" x 30.5" R26 (for Garage), 22.5" x 30.5" R39
- Here is this product's Specification Sheet