Vermont Natural Coatings Pure Matte Finish with PolyWhey®
Vermont Natural Coatings Pure Matte Finish with PolyWhey is a premium interior wood topcoat that provides a natural flat matte appearance while protecting the wood underneath. Made with PolyWhey® and plant-based resins, it is both safe and natural. Excellent chemical and water resistance. This product is part of our Climate Cool™ program.
Large volume customers – please contact us for larger sizes.
- Ultralow sheen, matte look
- Chemical and water-resistant
- Surpasses all environmental standards in the US & Canada
- Easy application & cleanup
- Cleans up with soap & water
- Non-flammable
- Low VOC: ≤ 225 g/L
Surface Preparation: Use on bare, unfinished, or previously coated wood. Surfaces must be clean, dry, and free of any grease or wax residue.
1) Stir well prior to use. Do not thin.
2) Always test finish on sample piece of wood to confirm desired appearance. For best results apply in temperatures between 60º F – 80º F with a relative humidity between 40% to 60%.
3) Using a brush, T-bar, painter pad, roller or spray gun apply thin even coats with the grain of the wood.
4) For best results, 2-3 coats are recommended. Allow two hours between coats, abrading after each finish application with a 220 frit or finer paper. For floors, always vacuum and tack with a clean damp cloth thoroughly between coats.
5) Allow one week for full cure
500-600 sq. ft. per gallon
Vermont Natural Coatings Pure Matte Finish with PolyWhey is a premium interior wood topcoat that provides a natural flat matte appearance while protecting the wood underneath. Made with PolyWhey® and plant-based resins, it is both safe and natural. Excellent chemical and water resistance. This product is part of our Climate Cool™ program.
Large volume customers – please contact us for larger sizes.
- Ultralow sheen, matte look
- Chemical and water-resistant
- Surpasses all environmental standards in the US & Canada
- Easy application & cleanup
- Cleans up with soap & water
- Non-flammable
- Low VOC: ≤ 225 g/L
Surface Preparation: Use on bare, unfinished, or previously coated wood. Surfaces must be clean, dry, and free of any grease or wax residue.
1) Stir well prior to use. Do not thin.
2) Always test finish on sample piece of wood to confirm desired appearance. For best results apply in temperatures between 60º F – 80º F with a relative humidity between 40% to 60%.
3) Using a brush, T-bar, painter pad, roller or spray gun apply thin even coats with the grain of the wood.
4) For best results, 2-3 coats are recommended. Allow two hours between coats, abrading after each finish application with a 220 frit or finer paper. For floors, always vacuum and tack with a clean damp cloth thoroughly between coats.
5) Allow one week for full cure
500-600 sq. ft. per gallon