For most applications, 1 coat of PolyWhey® Neptune Wood Floor Stain directly on bare wood is recommended, then top coat with 2-3 coats of your chosen Vermont Natural Coatings PolyWhey floor finish.
- Buildable color
- Low odor
- Non-flammable
- Safe for all indoor wood flooring
- Comes in eight different colors
- Easy application
- Soap & water cleanup
APPLICATION:
1) Stir and/or shake material thoroughly before use. If water popping floor prior to staining, wait until the floor is fully dried before applying Neptune wood stain.
2) Apply Neptune with the grain of the wood at coverage rate of approximately 700-800 sq. feet per gallon.
3) Allow Neptune to penetrate for 6-8 minutes then remove any excess with a soft clean cloth or buffing with non abrasive material. When a Vermont Natural Coatings floor finish is applied as the top coat, the color will shift back to its original tone.
4) Allow 8 hours of normal drying conditions before top coating with Vermont Natural Coatings top coats. Roller application is preferred, t-bar can be used.
5) After 2 coats of finish have been applied, lightly sand to knock down any grain raise. Apply final coat of your choice of Vermont Natural Coatings floor finish.
RECOMMENDED APPLICATION SYSTEM: For most applications, 1 coat of PolyWhey® Neptune Wood Floor Stain directly on bare wood is recommended, then top coat with 3 coats of your chosen Vermont Natural Coatings PolyWhey floor finish.
700-800 sq. ft. per gallon
APPLICATION:
1) Stir and/or shake material thoroughly before use. If water popping floor prior to staining, wait until the floor is fully dried before applying Neptune wood stain.
2) Apply Neptune with the grain of the wood at coverage rate of approximately 700-800 sq. feet per gallon.
3) Allow Neptune to penetrate for 6-8 minutes then remove any excess with a soft clean cloth or buffing with non abrasive material. When a Vermont Natural Coatings floor finish is applied as the top coat, the color will shift back to its original tone.
4) Allow 8 hours of normal drying conditions before top coating with Vermont Natural Coatings top coats. Roller application is preferred, t-bar can be used.
5) After 2 coats of finish have been applied, lightly sand to knock down any grain raise. Apply final coat of your choice of Vermont Natural Coatings floor finish.
RECOMMENDED APPLICATION SYSTEM: For most applications, 1 coat of PolyWhey® Neptune Wood Floor Stain directly on bare wood is recommended, then top coat with 3 coats of your chosen Vermont Natural Coatings PolyWhey floor finish.
700-800 sq. ft. per gallon