Vermont Natural Coatings Heirloom Fine Finish
- Rich, uniform finish
- Easy application with brush, clean lint-free cloth, paint pad, or spray
- Transparent, non-yellowing
- Neutral odor
- Soap & water cleanup
- Less than 30g/L VOC
SURFACE PREPARATION: Surfaces must be clean, dry, and free of any grease, glue, or other contaminants.
Application:
1. Stir well prior to use.
2. Be sure the wood surface is thoroughly clean and dry.
3. Using a lint-free cloth, paint pad, or quality synthetic or foam brush, apply thin, even coats in the direction of the grain.
4. The finish will be dry and ready to re-coat in two hours. After the second coat, sand lightly using 400 grit sandpaper.
5. Up to six coats are recommended.
6. One quart will cover approximately 125-150 sq ft.
Sizing guide
- Rich, uniform finish
- Easy application with brush, clean lint-free cloth, paint pad, or spray
- Transparent, non-yellowing
- Neutral odor
- Soap & water cleanup
- Less than 30g/L VOC
SURFACE PREPARATION: Surfaces must be clean, dry, and free of any grease, glue, or other contaminants.
Application:
1. Stir well prior to use.
2. Be sure the wood surface is thoroughly clean and dry.
3. Using a lint-free cloth, paint pad, or quality synthetic or foam brush, apply thin, even coats in the direction of the grain.
4. The finish will be dry and ready to re-coat in two hours. After the second coat, sand lightly using 400 grit sandpaper.
5. Up to six coats are recommended.
6. One quart will cover approximately 125-150 sq ft.