Franmar BEAN-e-doo Mastic & Adhesive Remover
An odorless, soy-based mastic remover, Bean-e-doo, is ideal for use in occupied areas like post offices,
schools, hospitals and other public places. Removing vinyl and ceramic mastic is a snap with this user-friendly product. Bean-e-doo was specially designed to remove asbestos mastic, dissolving it into a thick liquid.
It's so easy and safe to use that Bean-e-doo is the only product to pass both performance and environmental safety tests by the USPS for the removal of asbestos containing mastic. With a flash point over 400 degrees, less than 3% VOC's, non-toxic, and biodegradable, Bean-e-doo can be used without complaint or disruption.
*Not recommended for use on wood floors
Over 3,000,000 sq. ft. of mastic removed!
- As low as $0.12 per sq. ft.
- Virtually No Odor
- Cleans up easy with water or Franmar's Emerge Degreaser
- No Grinding or Dust
- Less than 3% VOC
|
Test Area: Due to variances in surfaces and conditions, always test in a small, inconspicuous area before beginning the whole project Application: Apply BEAN-e-doo directly onto the concrete surface. Spread around with a straw broom or squeegee using light pressure. If applying to mastic with trowel ridges, cover all trowel ridges with BEAN-e-doo. Allow BEAN-e-doo to sit until mastic softens. (Usuallly asbestos/black mastic will soften in 1 to 2 hours, and vinyl or acrylic mastic will soften in 4 to 8 hours.) After mastic has softened, remove with a long handled scraper or squeegee. Reapply if necessary.Clean Up: Clean remaining thin residue of BEAN-e-doo with Emerge Degreaser or with soap and water using a scrub brush and/or mop or power washer. Allow surface to dry before further preparations.Residue Test: After clean up, apply water to various small areas on the concrete and rub with fingers. If water turns cloudy white, it indicates there is BEAN-e-doo remaining on the surface. Repeat clean up steps and retest.Usage Tips:
|
Coverage: One gallon will usually cover between 100 to 200 sq ft. Many customers report getting up to 200 sq ft per gallon.Safe for Use On: ConcreteDo Not Use On: Wood surfaceBiodegradablepH Level: 6.65pHVOC (Volatile Organic Compounds) 2.3%, .06 lb/g, 20 g/l |
- Weight 32.4 lbs
- Size 275 Gallon Tote, 5 Gallon, 55 Gallon Drum, Case of Gallons (4), Case of Quarts (12), Gallon, Quart
Sizing guide
An odorless, soy-based mastic remover, Bean-e-doo, is ideal for use in occupied areas like post offices,
schools, hospitals and other public places. Removing vinyl and ceramic mastic is a snap with this user-friendly product. Bean-e-doo was specially designed to remove asbestos mastic, dissolving it into a thick liquid.
It's so easy and safe to use that Bean-e-doo is the only product to pass both performance and environmental safety tests by the USPS for the removal of asbestos containing mastic. With a flash point over 400 degrees, less than 3% VOC's, non-toxic, and biodegradable, Bean-e-doo can be used without complaint or disruption.
*Not recommended for use on wood floors
Over 3,000,000 sq. ft. of mastic removed!
- As low as $0.12 per sq. ft.
- Virtually No Odor
- Cleans up easy with water or Franmar's Emerge Degreaser
- No Grinding or Dust
- Less than 3% VOC
|
Test Area: Due to variances in surfaces and conditions, always test in a small, inconspicuous area before beginning the whole project Application: Apply BEAN-e-doo directly onto the concrete surface. Spread around with a straw broom or squeegee using light pressure. If applying to mastic with trowel ridges, cover all trowel ridges with BEAN-e-doo. Allow BEAN-e-doo to sit until mastic softens. (Usuallly asbestos/black mastic will soften in 1 to 2 hours, and vinyl or acrylic mastic will soften in 4 to 8 hours.) After mastic has softened, remove with a long handled scraper or squeegee. Reapply if necessary.Clean Up: Clean remaining thin residue of BEAN-e-doo with Emerge Degreaser or with soap and water using a scrub brush and/or mop or power washer. Allow surface to dry before further preparations.Residue Test: After clean up, apply water to various small areas on the concrete and rub with fingers. If water turns cloudy white, it indicates there is BEAN-e-doo remaining on the surface. Repeat clean up steps and retest.Usage Tips:
|
Coverage: One gallon will usually cover between 100 to 200 sq ft. Many customers report getting up to 200 sq ft per gallon.Safe for Use On: ConcreteDo Not Use On: Wood surfaceBiodegradablepH Level: 6.65pHVOC (Volatile Organic Compounds) 2.3%, .06 lb/g, 20 g/l |
- Weight 32.4 lbs
- Size 275 Gallon Tote, 5 Gallon, 55 Gallon Drum, Case of Gallons (4), Case of Quarts (12), Gallon, Quart