Chemlink Web Seal Roof Repair Tape
A roof repair job can range anywhere from fixing a leak to re-coating or replacing the entire roof.
Nevertheless, in many cases the same techniques used in more severe cases of roof damage are used to
deal with smaller issues. Not only can this be expensive and time consuming but thanks to Chemlink
Web Seal Roof Repair Tape, it is entirely unnecessary. Chemlink Web Seal Roof Repair Tape is
versatile, works on all roof types, and is easy to use... Clean, Stick and Apply Pressure - you're
done!
Chemlink Roof Repair Tapes quickly fix leaks on most types of roofs. Advanced MicroSealant Technology
instantly & permanently bonds to EPDM, Gutters, Flashings, Single Ply & PVC.
Chemlink Roof Repair Tapes featuring MicroSealant technology are formulated from non-butyl synthetic
rubbers and resins, and in some versions thermoplastics. The resulting technology produces a
primer-like instant bond to most known materials used in traditional building envelope and roofing
applications (excluding silicone).
MicroSealants feature a molecular structure that is extremely stable—it is resistant to oxygen,
ozone, heat, extreme cold and the effects of temperature recycling. MicroSealants will bond to
almost any selected substrate at a molecular level, increasing surface area, and resulting in a
"fusing" action, and they are self-healing.
MicroSealants can be installed across a wide temperature range, from -20°F to (-29°C) to at least
150°F (66°C). Installed temperature tolerance ranges from -70°F (-56°C) to over 250°F (121°C) on
vertical surfaces and in excess of 300°F (148°C) on flat, horizontal surfaces.
MicroSealants are extremely tolerant of chemical contact, making them ideal for use in extreme
industrial environments.
MicroSealants are environmentally stable and contain no solvents or VOCS, are safe to use (virtually,
although not technical food service grade) and do not off-gas, so they will not compromise air
quality within the building envelope.
Chemlink Web Seal Benefits
- 30 mils thick
- Maximum conform-ability
- Designed to hold all roof coatings and sealers
- Fabric backing
- Perfect for making all roofs/surfaces watertight before coating is applied
Compatible Substrates
- EPDM
- Gutters
- Flashings
- PVC
- Single Ply
Features
-
adhesion: 19 lb/inch width
-
temp range: application temp -20F to 150F
ambient
-
elongation >500%
-
pliability: no cracks in membrane
-
shelf life up to 5 years
Installation
Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove
oil and grease, etc. with isopropyl alchohol or a non-residue cleaner such as acetone or lacquer
thinner. Remove salt and other contaminants. Install WebSeal over the repair area, removing the release
liner gradually to prevent contamination of the adhesive prior to application. Rub or roll with pressure
using your hand or steel roller to activate bonding process. This material may be applied to clean dry
surfaces from 150° F to -20° F ambient. Treat surface with EternaPrime for installations from 40° F to
-20° F ambient. A topcoat of roofing coating is necessary for UV protection.
Available Sizes
- Carton of 6 - 4" x 50'
- Carton of 4 - 6" x 50'
- Carton of 3 - 8" x 50'
- Carton of 2 - 12" x 50'
Available Colors
Specs
Chemlink WebSeal Roof Repair Tape Technical Data Sheet
Chemlink WebSeal Roof Repair Tape SDS