ChemLink Metal Roof E-curb™ Penetration Seal System

$124.95
  • Metal Roof E-Curb penetration seals replace old-style rubber boots with versatile, precast components and non-sag 1-Part polyether sealants for installations on a sloped substrate. Chem Link’s Metal Roof E-Curb System can usually be installed in under 15 minutes and never requires flashing or mechanical attachment. E-Curbs are designed for use on metal roofing systems that require adhesion to Kynar 500® PVDF coated metals. E-Curbs are highly versatile for sealing penetrations around HVAC, mechanical, solar panel mounts, electrical, and any type of structural supports. TPO Primer is required for use with TPO single-ply roofing membrane.

 

Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Remove all previously applied caulk, mastic, cement, asphalt, and other contaminants from penetrations with a wire brush. Isopropyl alcohol is an effective cleaner for surface preparation. Please contact customer service for application guidelines with temperatures below 32°F (0°C). This product sets rapidly upon exposure to moisture. Please refer to data sheet for step-by-step installation guidelines and more roof penetration details. Only available through Chem Link distributors.

RAPID INSTALLATION 'slip -fit' light weight curb design

1-PART FEATURE accommodates movement

WIDE RANGE -40F to 200F

TIME SAVING no flashing required


Vendors: ChemLink SKU: F1361GR
  • 5
    369 (88.3%)
  • 4
    33 (7.9%)
  • 3
    11 (2.6%)
  • 2
    2 (0.5%)
  • 1
    3 (0.7%)
96% of customers rate this company 4- or 5-stars
Newest to Oldest
  • Favorite Reviews
  • Highest to Lowest
  • Newest to Oldest
All Ratings
  • All Ratings
  • 5 ★ Reviews
  • 4 ★ Reviews
  • 3 ★ Reviews
  • 2 ★ Reviews
  • 1 ★ Reviews
Christine B. Verified Customer
02-17-25

Patient staff with returns and repurchases.

Tessa P. Verified Customer
02-15-25

Great helpful sales partner

Sonia S. Verified Customer
02-15-25

Only problem is I couldn’t see a colour. Sample for dark roast medium roast or espresso and that’s in the range I needed so it would’ve been nice to have seen it.

John D. Verified Customer
02-11-25

Josh in flooring was very helpful.

Jeanine S. Verified Customer
02-11-25

you carry a hard find product

PETER M. Verified Customer
02-08-25

Gets me what i need but shipping is too expensive

James D. Verified Customer
02-04-25

Easy process

Jeffrey M. Verified Customer
02-03-25

Quick and easy purchase. Interested to see how long it takes to receive. Working on a project to air seal my attic space.

Matt C. Verified Customer
02-03-25

great

Daniel I. Verified Customer
01-31-25

Had to use phone since laptop not avail, hence not easily viewed or keyboarded…,,

slide 2 of 50
  • Metal Roof E-Curb penetration seals replace old-style rubber boots with versatile, precast components and non-sag 1-Part polyether sealants for installations on a sloped substrate. Chem Link’s Metal Roof E-Curb System can usually be installed in under 15 minutes and never requires flashing or mechanical attachment. E-Curbs are designed for use on metal roofing systems that require adhesion to Kynar 500® PVDF coated metals. E-Curbs are highly versatile for sealing penetrations around HVAC, mechanical, solar panel mounts, electrical, and any type of structural supports. TPO Primer is required for use with TPO single-ply roofing membrane.

 

Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Remove all previously applied caulk, mastic, cement, asphalt, and other contaminants from penetrations with a wire brush. Isopropyl alcohol is an effective cleaner for surface preparation. Please contact customer service for application guidelines with temperatures below 32°F (0°C). This product sets rapidly upon exposure to moisture. Please refer to data sheet for step-by-step installation guidelines and more roof penetration details. Only available through Chem Link distributors.

RAPID INSTALLATION 'slip -fit' light weight curb design

1-PART FEATURE accommodates movement

WIDE RANGE -40F to 200F

TIME SAVING no flashing required