ChemLink Low Voc Epdm/tpo Primer

$59.27
  • A solvent based liquid primer that is designed to comply with VOC regulations. It can be brush applied to EPDM or TPO roofing membranes, plastics, and any other difficult bonding surface.
Read SDS before use. Eliminate all ignition sources. DO NOT SMOKE. Mixing is not recommended, even when settling occurs. Do not thin. Thinning will affect performance. Clean debris from EPDM or TPO surface and wash with isopropyl alcohol. Brush apply the primer directly to the roof surface, starting at the base of the roof penetration, extending out a minimum of one inch beyond the perimeter of the ChemCurb/Ecurb on all sides. No streaks from primer starved areas should be visible. Allow the Low-VOC Primer to flash-off until it does not transfer to a dry finger touch yet remains tacky. Install ChemCurb/Ecurb according to application instructions. Coverage Rate - Approximately 700 ft²/gallon (65 m²). Only available through Chem Link distributors.

SHELF LIFE 9 months

VOC COMPLIANT less than 250 g/l

BASE synthetic rubber

SDS Low VOC Primer

Technical Bulletin Low VOC TPO Primer

Tech Data Sheet Low VOC Primer


Vendors: ChemLink SKU: F1280
4.8
418 Reviews
  • 5
    369 (88.3%)
  • 4
    33 (7.9%)
  • 3
    11 (2.6%)
  • 2
    2 (0.5%)
  • 1
    3 (0.7%)
96% of customers rate this company 4- or 5-stars
Newest to Oldest
  • Favorite Reviews
  • Highest to Lowest
  • Newest to Oldest
All Ratings
  • All Ratings
  • 5 ★ Reviews
  • 4 ★ Reviews
  • 3 ★ Reviews
  • 2 ★ Reviews
  • 1 ★ Reviews
Christine B. Verified Customer
02-17-25

Patient staff with returns and repurchases.

Tessa P. Verified Customer
02-15-25

Great helpful sales partner

Sonia S. Verified Customer
02-15-25

Only problem is I couldn’t see a colour. Sample for dark roast medium roast or espresso and that’s in the range I needed so it would’ve been nice to have seen it.

John D. Verified Customer
02-11-25

Josh in flooring was very helpful.

Jeanine S. Verified Customer
02-11-25

you carry a hard find product

PETER M. Verified Customer
02-08-25

Gets me what i need but shipping is too expensive

James D. Verified Customer
02-04-25

Easy process

Jeffrey M. Verified Customer
02-03-25

Quick and easy purchase. Interested to see how long it takes to receive. Working on a project to air seal my attic space.

Matt C. Verified Customer
02-03-25

great

Daniel I. Verified Customer
01-31-25

Had to use phone since laptop not avail, hence not easily viewed or keyboarded…,,

  • 1
  • 2
  • 3
  • 4
  • 5
See more reviews on Shopper Approved
slide 2 of 50
Christine B.02-17-25

Patient staff with returns and repurchases.

  • A solvent based liquid primer that is designed to comply with VOC regulations. It can be brush applied to EPDM or TPO roofing membranes, plastics, and any other difficult bonding surface.
Read SDS before use. Eliminate all ignition sources. DO NOT SMOKE. Mixing is not recommended, even when settling occurs. Do not thin. Thinning will affect performance. Clean debris from EPDM or TPO surface and wash with isopropyl alcohol. Brush apply the primer directly to the roof surface, starting at the base of the roof penetration, extending out a minimum of one inch beyond the perimeter of the ChemCurb/Ecurb on all sides. No streaks from primer starved areas should be visible. Allow the Low-VOC Primer to flash-off until it does not transfer to a dry finger touch yet remains tacky. Install ChemCurb/Ecurb according to application instructions. Coverage Rate - Approximately 700 ft²/gallon (65 m²). Only available through Chem Link distributors.

SHELF LIFE 9 months

VOC COMPLIANT less than 250 g/l

BASE synthetic rubber

SDS Low VOC Primer

Technical Bulletin Low VOC TPO Primer

Tech Data Sheet Low VOC Primer