AFM Safecoat Safe Seal
$8.00
/
- Used on: Non-trafficked, porous surfaces such as processed wood products, concrete, wood, new drywall, grout, and plaster.
- seals formaldehyde outgassing from processed wood such as plywood, particle board, and pressed wood
- Milky appearance, dries clear
- Safely used by and for the chemically sensitive.
- Low odor, non-offensive to installer and occupant.
- fights indoor air pollution, seals in the outgassing from the substrate.
- Low VOC content, meets or exceeds all federal and state air quality regulations, including California. n Contains no formaldehyde
- One gallon covers approximately 350-500 square feet
- Used on: Non-trafficked, porous surfaces such as processed wood products, concrete, wood, new drywall, grout, and plaster.
- seals formaldehyde outgassing from processed wood such as plywood, particle board, and pressed wood
- Milky appearance, dries clear
- Safely used by and for the chemically sensitive.
- Low odor, non-offensive to installer and occupant.
- fights indoor air pollution, seals in the outgassing from the substrate.
- Low VOC content, meets or exceeds all federal and state air quality regulations, including California. n Contains no formaldehyde
- One gallon covers approximately 350-500 square feet
Reduce Toxic Off-Gassing with AFM Safecoat Safe Seal
The AFM Safecoat Safe Seal is used primarily to reduce toxic out-gassing: in particular, it is highly effective at sealing in formaldehyde off-gassing from processed wood such as plywood, particle board, and pressed wood. It is virtually odorless on application and odorless once cured. This safe seal product is a multi-use, water-based, low gloss sealer for highly porous interior surfaces such as particle board, plywood, processed wood, and porous concrete.- Containing 12 g/l VOCs, this low VOC sealant meets or exceeds all federal and state air quality regulations, including California.
Usage
Porous surfaces such as processed wood products, concrete, wood, new drywall and plaster. Test surfaces first in inconspicuous areas to be sure product absorbs into surfaces completely. Excellent at controlling emissions of open faced and faced fiberglass batt insulation, simply fog spray surfaces. Safecoat Safe Seal’s superior adhesion to a variety of surfaces allows for its use as a bonding primer to improve the adhesion and bonding power of adhesives and coatings on difficult surfaces. For example, apply a thin coat to the slab and bottom of the tile before laying floor tile adhesive (in this application no cure period is necessary; the adhesive may be applied while the Safe Seal is still tacky). To learn more details about our safety seal products, please don’t hesitate to give our knowledgeable team a call or contact us here. We look forward to hearing from you!Safecoat Safe Seal Low-Gloss Sealant Advantages
- Highly effective at sealing in toxicity of underlying surface.
- Safely used by and for the chemically sensitive.
- Low odor, non-offensive to installer and occupant.
- Fights indoor air pollution, seals in the out-gassing from the substrate.
- Low VOC content (12 Â g/l VOCs).
- Meets or exceeds all Federal and State air quality regulations, including California.
- Contains no formaldehyde.
Sizes
- 1 quart.
- 1 gallon.
- 5 gallon.