Rubio Monocoat New Product "Renew"
Rubio Monocoat has introduced a new product Renew to the Rubio family. This a fast & easy way to bring back the fresh new oiled look to that beautiful floor, just like when originally done. The product brings the surface back a freshly oiled state, especially on higher trafficked areas or areas that are dry or warn looking for any particular reason. Renew restores the depth and vibrancy of the color that is “Already coated with the rubio monocoat oil plus 2c. It will also, masks scratches on the surface as long as the surface is not damaged.
Very Easy to apply and will be safe to walk on in 4 to 6 hours. (Again, this product only works if the floors are covered with the RM Oil)
Complete curing takes place after 6 days
APPLICATION INFORMATION
Instructions
STEP 1. Eliminate dirt and dust from the floor.
STEP 2. Apply Rubio® Monocoat Renew on to the surface to be treated. Use a minimal amount of the product to prevent
the floor from becoming sticky.
STEP 3. Allow the product to react for a couple of minutes.
STEP 4. Wipe dry with a cloth, paper towel, or buffer with a white pad.
STEP 5. Perform a final wipe using an absorbing cloth, until the surface feels completely dry.
STEP 6. Continue working in zones that can be fully wiped dry within 10 to 15 minutes.
The surface can be walked on after 4 to 6 hours.
Buy Now
