83

Sealin' Hatch Insulated Attic Access Door for Ceiling

$176.75 $169.47
Features of Sealin' Hatch Insulated Attic Access Door for Ceiling Installations:
    • Pre-built unit, easy to install
    • R39 version meets most building codes
    • R26 version intended for garages
    • Built to fit standard on-center framing dimensions (16" or 24" on-center), though you can also add framing to fit non-standard spaces
    • Actual box size is slightly smaller than rough opening dimensions to provide 1/4" gap - you will want shims on hand to shim in place for fastening
    • For an insulated attic access door through a knee wall, click here.
    • Here is this product's Specification Sheet
    • Click here to read about framing for attic access

Sealin' Hatch Insulated Attic Access Door

The Sealin' Hatch Insulated Attic Access Door is a fully assembled, insulated attic access system designed to save builders and homeowners time, energy, and money when building, remodeling, or adding attic access for maintenance.

Attic access doors from Sealin' Hatch are installed in a rectangular opening in your ceiling, between and mounted to ceiling joists. Pre-built out of the box; just insert it into the properly sized opening and shim it in place until you can fasten it to the joists.

To enter the attic, push the insulated panel up into the attic and to the side. When exiting the attic, slide the insulated panel back over the opening and down into the hatch framing where it will rest snugly in place with gravity.

Key Features of this Insulated Attic Access Door

  • Ideal for New Builds & Remodels
  • No Assembly Required
  • No Rough Framing Needed
  • Environmentally safe 75% Recycled Fiber Insulation
  • R-39 Insulation Comes Pre-Attached (or see R-26 version for garages)
  • Energy-saving Weather Stripping
  • Energy Star Standards
  • 12" Loose-fill Insulation Dam (shorter for garage version)
  • Sturdy Construction
  • Pre-primed Trim and Door Panel - ready to (sand and) Paint after Installation
  • Installs with just 6 screws (Included)
  • Made in the USA

Click here for the Knee-Wall version: Sealin' Hatch Insulated Knee-Wall Hatch

Insulated Attic Access Door - Sizes and R-Values

  • 14 1/2" x 22 1/2" rough opening size. R-39. It fits between true 16" and 24" on-centered ceiling joists or 14.5" rough opening (you will want to have shims on hand for shimming in place into a 14 1/2" rough opening). Can be turned to fit between 24" on-centered ceiling joists.
  • 22 1/2" x 30 1/2" rough opening size. R-39. Meets building code for size.
  • 22 1/2" x 30 1/2" rough opening size. R-26. Meets code for size and fire for attached garage installations or for sheds, garages, or attic areas that require less R-value/insulation.
  • Here is this product's
    Technical Data Sheet

This article demonstrates locating and cutting the hole in the ceiling into which the attic hatch can be installed:
DIY Attic Access Installation Blog

  • Weight: N/A
  • Dimensions: N/A
  • Size: 14.0" x 22.5" R39, 22.5" x 30.5" R26 (for Garage), 22.5" x 30.5" R39
  • See this product's Technical Data Sheet

Size
Vendors: Sealin Hatch SKU: SHC-1624
Features of Sealin' Hatch Insulated Attic Access Door for Ceiling Installations:
    • Pre-built unit, easy to install
    • R39 version meets most building codes
    • R26 version intended for garages
    • Built to fit standard on-center framing dimensions (16" or 24" on-center), though you can also add framing to fit non-standard spaces
    • Actual box size is slightly smaller than rough opening dimensions to provide 1/4" gap - you will want shims on hand to shim in place for fastening
    • For an insulated attic access door through a knee wall, click here.
    • Here is this product's Specification Sheet
    • Click here to read about framing for attic access

Sealin' Hatch Insulated Attic Access Door

The Sealin' Hatch Insulated Attic Access Door is a fully assembled, insulated attic access system designed to save builders and homeowners time, energy, and money when building, remodeling, or adding attic access for maintenance.

Attic access doors from Sealin' Hatch are installed in a rectangular opening in your ceiling, between and mounted to ceiling joists. Pre-built out of the box; just insert it into the properly sized opening and shim it in place until you can fasten it to the joists.

To enter the attic, push the insulated panel up into the attic and to the side. When exiting the attic, slide the insulated panel back over the opening and down into the hatch framing where it will rest snugly in place with gravity.

Key Features of this Insulated Attic Access Door

  • Ideal for New Builds & Remodels
  • No Assembly Required
  • No Rough Framing Needed
  • Environmentally safe 75% Recycled Fiber Insulation
  • R-39 Insulation Comes Pre-Attached (or see R-26 version for garages)
  • Energy-saving Weather Stripping
  • Energy Star Standards
  • 12" Loose-fill Insulation Dam (shorter for garage version)
  • Sturdy Construction
  • Pre-primed Trim and Door Panel - ready to (sand and) Paint after Installation
  • Installs with just 6 screws (Included)
  • Made in the USA

Click here for the Knee-Wall version: Sealin' Hatch Insulated Knee-Wall Hatch

Insulated Attic Access Door - Sizes and R-Values

  • 14 1/2" x 22 1/2" rough opening size. R-39. It fits between true 16" and 24" on-centered ceiling joists or 14.5" rough opening (you will want to have shims on hand for shimming in place into a 14 1/2" rough opening). Can be turned to fit between 24" on-centered ceiling joists.
  • 22 1/2" x 30 1/2" rough opening size. R-39. Meets building code for size.
  • 22 1/2" x 30 1/2" rough opening size. R-26. Meets code for size and fire for attached garage installations or for sheds, garages, or attic areas that require less R-value/insulation.
  • Here is this product's
    Technical Data Sheet

This article demonstrates locating and cutting the hole in the ceiling into which the attic hatch can be installed:
DIY Attic Access Installation Blog

  • Weight: N/A
  • Dimensions: N/A
  • Size: 14.0" x 22.5" R39, 22.5" x 30.5" R26 (for Garage), 22.5" x 30.5" R39
  • See this product's Technical Data Sheet

  • Easy Returns

    Easy Returns

    Return within 30 days of purchase date

  • Technical Support

    Technical Support

    Available 9am - 5pm EST Mon-Fri

  • Customer Support

    Customer Support

    Available 9am - 5pm EST, Mon-Fri

  • Fast Shipping

    Fast Shipping

    Ships within 48 hours if in stock