Rubio Monocoat Universal Maintenance Oil

$8.99

Rubio Monocoat Universal Maintenance Oil effectively enhances sheen while nourishing finished wood. If color restoration and sheen enhancement are not required, Renew may be used.

Universal Maintenance Oil is used to increase the sheen (approx. satin) and nourish wood finished with Rubio Monocoat Oil, giving it a fuller look. It can also be used to convert floors with other oils to a Rubio Monocoat floor.

Once Universal Maintenance Oil has been applied to a surface, future maintenance must be performed using Universal Maintenance Oil.

If color restoration is required, perform a renovation using Oil Plus 2C in the original color.

How much will you need? Note that calculations are estimates. Your results may vary based on species, water popping, sanding, etc...

Spread Rate 1,500-2,000 ft²/L
Cure Time 6 days
VOC Content 0%
Color Options 5
Dilutable No
Shelf Life 12 months
Combustion warning Cloths, saturated with oil, may spontaneously combust. After usage, they need to be soaked in water before disposal.
Universal Maintenance Oil has achieved the following certifications:
  • Toy standard EN 71-3
  • 0% VOC
An overview of instructions. Please consult the TDS for complete product information.

Application

Furniture, Stairs, and Worktops

1. Clean the surface using Rubio Monocoat Surface Care Spray.

2. Let the surface dry for approximately 15 minutes. TIP: Do not leave water on the surface; it is sufficient to clean damp. Avoid walking on the floor until it is completely dry.

3. Take the Universal Maintenance Oil and stir thoroughly until you obtain a homogeneous mixture.

4. Apply a small amount of oil with a brush, then spread it out using a white or red pad. Work in areas of 20 to 40 ft², which can be finished within approximately 15 minutes, including the next step.

5. Allow the oil to absorb for a few minutes, then wipe away any excess oil with a cloth or a white pad. Each treated area should be wiped dry within 15 minutes and should not feel sticky anymore.

Flooring

1. Clean the surface using Rubio Monocoat Soap or Rubio Monocoat Surface Care Spray.

2. Allow the floor to dry for approximately 15 minutes. Do not walk on the floor until it is completely dry.

3. Take the Universal Maintenance Oil and stir thoroughly until you obtain a homogeneous mixture.

4. Work in areas of 50 to 100 ft². Start by treating the edges of each area with a white or red pad. Then, apply a small amount of Universal Maintenance Oil every couple of feet with a brush. Spread the oil in the direction of the wood using a buffer with a white or red pad.

5. Wipe away any excess oil with a cloth or a buffer with a white pad.

6. After finishing all the areas, go over them again with a new white pad. The surface should not feel sticky anymore.


Size: 20 Milliliter
Color: White
Vendors: Rubio Monocoat SKU: UMOWHITE/20ML
  • 5
    369 (88.3%)
  • 4
    33 (7.9%)
  • 3
    11 (2.6%)
  • 2
    2 (0.5%)
  • 1
    3 (0.7%)
96% of customers rate this company 4- or 5-stars
Newest to Oldest
  • Favorite Reviews
  • Highest to Lowest
  • Newest to Oldest
All Ratings
  • All Ratings
  • 5 ★ Reviews
  • 4 ★ Reviews
  • 3 ★ Reviews
  • 2 ★ Reviews
  • 1 ★ Reviews
Christine B. Verified Customer
02-17-25

Patient staff with returns and repurchases.

Tessa P. Verified Customer
02-15-25

Great helpful sales partner

Sonia S. Verified Customer
02-15-25

Only problem is I couldn’t see a colour. Sample for dark roast medium roast or espresso and that’s in the range I needed so it would’ve been nice to have seen it.

John D. Verified Customer
02-11-25

Josh in flooring was very helpful.

Jeanine S. Verified Customer
02-11-25

you carry a hard find product

PETER M. Verified Customer
02-08-25

Gets me what i need but shipping is too expensive

James D. Verified Customer
02-04-25

Easy process

Jeffrey M. Verified Customer
02-03-25

Quick and easy purchase. Interested to see how long it takes to receive. Working on a project to air seal my attic space.

Matt C. Verified Customer
02-03-25

great

Daniel I. Verified Customer
01-31-25

Had to use phone since laptop not avail, hence not easily viewed or keyboarded…,,

slide 2 of 50

Rubio Monocoat Universal Maintenance Oil effectively enhances sheen while nourishing finished wood. If color restoration and sheen enhancement are not required, Renew may be used.

Universal Maintenance Oil is used to increase the sheen (approx. satin) and nourish wood finished with Rubio Monocoat Oil, giving it a fuller look. It can also be used to convert floors with other oils to a Rubio Monocoat floor.

Once Universal Maintenance Oil has been applied to a surface, future maintenance must be performed using Universal Maintenance Oil.

If color restoration is required, perform a renovation using Oil Plus 2C in the original color.

How much will you need? Note that calculations are estimates. Your results may vary based on species, water popping, sanding, etc...

Spread Rate 1,500-2,000 ft²/L
Cure Time 6 days
VOC Content 0%
Color Options 5
Dilutable No
Shelf Life 12 months
Combustion warning Cloths, saturated with oil, may spontaneously combust. After usage, they need to be soaked in water before disposal.
Universal Maintenance Oil has achieved the following certifications:
  • Toy standard EN 71-3
  • 0% VOC
An overview of instructions. Please consult the TDS for complete product information.

Application

Furniture, Stairs, and Worktops

1. Clean the surface using Rubio Monocoat Surface Care Spray.

2. Let the surface dry for approximately 15 minutes. TIP: Do not leave water on the surface; it is sufficient to clean damp. Avoid walking on the floor until it is completely dry.

3. Take the Universal Maintenance Oil and stir thoroughly until you obtain a homogeneous mixture.

4. Apply a small amount of oil with a brush, then spread it out using a white or red pad. Work in areas of 20 to 40 ft², which can be finished within approximately 15 minutes, including the next step.

5. Allow the oil to absorb for a few minutes, then wipe away any excess oil with a cloth or a white pad. Each treated area should be wiped dry within 15 minutes and should not feel sticky anymore.

Flooring

1. Clean the surface using Rubio Monocoat Soap or Rubio Monocoat Surface Care Spray.

2. Allow the floor to dry for approximately 15 minutes. Do not walk on the floor until it is completely dry.

3. Take the Universal Maintenance Oil and stir thoroughly until you obtain a homogeneous mixture.

4. Work in areas of 50 to 100 ft². Start by treating the edges of each area with a white or red pad. Then, apply a small amount of Universal Maintenance Oil every couple of feet with a brush. Spread the oil in the direction of the wood using a buffer with a white or red pad.

5. Wipe away any excess oil with a cloth or a buffer with a white pad.

6. After finishing all the areas, go over them again with a new white pad. The surface should not feel sticky anymore.