Vermont Natural Coatings - Bohme BoMol Exterior Trim Stain

$34.75

Vermont Natural Coatings Bohme BoMol Exterior Stain Colors

Vermont Natural Coatings Bohme BoMol Exterior Stain is a natural oil / waterborne hybrid stain that protects wood from UV rays and delivers a paint-like surface build. It's formulated for exterior wood trim, doors windows, and siding. It can be used on new or pre-stained wood.

Vermont Natural Coatings - Bohme - BoMol Exterior Trim Stain

Vermont Natural Coatings and Böhme’s BoMol Exterior trim stain is for use on trim, doors, windows and siding and can be used on new and pre-stained wood. Protects wood from damaging UV rays. Paint-like surface build with the penetration of a stain. Böhme has been manufacturing stains and coatings in Switzerland since 1866. These natural hybrid-oil stains and environmentally-friendly wood finishes are made in the USA and available throughout North America through a partnership with Vermont Natural Coatings. The Böhme line, for both interior and exterior applications, applies, penetrates and looks like a traditional oil. These coatings clean up with soap and water, are easy to use and maintain, and are still < 30g/L VOC.

BoMol Exterior Trim Stain Features

  • Ultra-Low VOC (Less than 30g/L)
  • Covers 250-350 sq. ft. per gallon
  • Ready for second coat after 24 hours
  • 12 month shelf life unopened
  • Available in quarts, gallons and five gallon pails
  • Easy application & water cleanup

Color

  • Available in 16 colors:
Vermont Natural Coatings Bohme BoMol Exterior Stain

Vermont Natural Coatings Bohme BoMol Exterior Stain available in 16 colors

Available In:

  • 5 Gallon
  • 1 Gallon
  • 8 oz. Sample
  • Also available in cases of 4 gallons and cases of 6 quarts

Surface Preparation:

  • Surfaces must be clean, dry and free of any grease, glue or other contaminants prior to staining.
  • For previously stained wood, sand surface lightly to help adhesion.
  • If coating unfinished softwood, we recommend using Suncare 900 as a pre-treatment.
  • For all other unfinished woods, pre-treat with Hydro-Oil Primer.

Application:

  1. Stir well prior to use.
  2. Always test the finish on a sample piece of wood to confirm the desired appearance.
  3. Apply with brush, paint pad, roller or spray.
  4. Two coats are recommended on all sides of wood.
  5. Apply evenly with the grain and always maintain a wet edge. If rolling, follow with a brush or paint pad.
  6. For best results apply in temperatures between 45° – 80°F and relative humidity of 40%-60% Do not apply when rain is expected within 24 hours.

Coverage

  • 250 - 350 square feet per gallon.
 
  • Weight 15 lbs
  • Size 1 Gallon, 5 Gallons, 8 oz. sample, Case of (4) Gallons, Case of (6) Quarts
  • Color Brown, Butternut, Cedar Mill, Clear, Harbor Gray, Honey Tone, Oil Tone, Palisander, Pure Natural, Silver Grey, Slate Grey, Smoke, Walnut, Weathered, Western Red Cedar, Whitewash

Size
Color
  • ARBOR DAY
  • Best Small Business Award
  • Customer Reviews
Vendors: VNC SKU: 101944
  • Easy Returns

    Easy Returns

    Return within 30 days of purchase date

  • Technical Support

    Technical Support

    Available 9am - 5pm EST Mon-Fri

  • Customer Support

    Customer Support

    Available 9am - 5pm EST, Mon-Fri

  • Fast Shipping

    Fast Shipping

    Ships within 48 hours if in stock

Vermont Natural Coatings Bohme BoMol Exterior Stain Colors

Vermont Natural Coatings Bohme BoMol Exterior Stain is a natural oil / waterborne hybrid stain that protects wood from UV rays and delivers a paint-like surface build. It's formulated for exterior wood trim, doors windows, and siding. It can be used on new or pre-stained wood.

Vermont Natural Coatings - Bohme - BoMol Exterior Trim Stain

Vermont Natural Coatings and Böhme’s BoMol Exterior trim stain is for use on trim, doors, windows and siding and can be used on new and pre-stained wood. Protects wood from damaging UV rays. Paint-like surface build with the penetration of a stain. Böhme has been manufacturing stains and coatings in Switzerland since 1866. These natural hybrid-oil stains and environmentally-friendly wood finishes are made in the USA and available throughout North America through a partnership with Vermont Natural Coatings. The Böhme line, for both interior and exterior applications, applies, penetrates and looks like a traditional oil. These coatings clean up with soap and water, are easy to use and maintain, and are still < 30g/L VOC.

BoMol Exterior Trim Stain Features

  • Ultra-Low VOC (Less than 30g/L)
  • Covers 250-350 sq. ft. per gallon
  • Ready for second coat after 24 hours
  • 12 month shelf life unopened
  • Available in quarts, gallons and five gallon pails
  • Easy application & water cleanup

Color

  • Available in 16 colors:
Vermont Natural Coatings Bohme BoMol Exterior Stain

Vermont Natural Coatings Bohme BoMol Exterior Stain available in 16 colors

Available In:

  • 5 Gallon
  • 1 Gallon
  • 8 oz. Sample
  • Also available in cases of 4 gallons and cases of 6 quarts

Surface Preparation:

  • Surfaces must be clean, dry and free of any grease, glue or other contaminants prior to staining.
  • For previously stained wood, sand surface lightly to help adhesion.
  • If coating unfinished softwood, we recommend using Suncare 900 as a pre-treatment.
  • For all other unfinished woods, pre-treat with Hydro-Oil Primer.

Application:

  1. Stir well prior to use.
  2. Always test the finish on a sample piece of wood to confirm the desired appearance.
  3. Apply with brush, paint pad, roller or spray.
  4. Two coats are recommended on all sides of wood.
  5. Apply evenly with the grain and always maintain a wet edge. If rolling, follow with a brush or paint pad.
  6. For best results apply in temperatures between 45° – 80°F and relative humidity of 40%-60% Do not apply when rain is expected within 24 hours.

Coverage

  • 250 - 350 square feet per gallon.
 
  • Weight 15 lbs
  • Size 1 Gallon, 5 Gallons, 8 oz. sample, Case of (4) Gallons, Case of (6) Quarts
  • Color Brown, Butternut, Cedar Mill, Clear, Harbor Gray, Honey Tone, Oil Tone, Palisander, Pure Natural, Silver Grey, Slate Grey, Smoke, Walnut, Weathered, Western Red Cedar, Whitewash

  • Weight 15 lbs
  • Size 1 Gallon, 5 Gallons, 8 oz. sample, Case of (4) Gallons, Case of (6) Quarts
  • Color Brown, Butternut, Cedar Mill, Clear, Harbor Gray, Honey Tone, Oil Tone, Palisander, Pure Natural, Silver Grey, Slate Grey, Smoke, Walnut, Weathered, Western Red Cedar, Whitewash

An ultra-low VOC, hybrid waterborne-oil stain designed to deliver paint-like surface build with deep stain penetration for exterior wood trim, doors, windows, and siding.

Manufactured in the USA by Vermont Natural Coatings using Böhme’s 150+ years of Swiss formulation heritage.

BoMol is water-based, cleans up with soap and water, and has ultra-low VOC (≤30 g/L).

Ideal for exterior trim, doors, windows, and siding on new or properly prepped pre-stained wood.

Offered in 16 standard shades, available in 8 oz samples, quarts, gallons, and five-gallon pails. Custom finishes available for large orders.

Approximately 250–350 sq ft per gallon, depending on wood porosity.

Dry to touch in ~24 hours, ready for second coat after 24 hours, fully cures within one week.

Pot life up to 12 months unopened; store between 40–90 °F.

BoMol shows no visual defects under chemical exposure—excellent long-term performance.

Neutral odor.

Dries to a semi-solid clarity that enhances wood grain.

Yes—BoMol should not be frozen; it exhibits no freeze/thaw stability.

Ensure surfaces are clean, dry, and free of contaminants. For unfinished softwoods, pretreat with Suncare 900; otherwise use Hydro-Oil Primer. Sand pre-stained wood lightly.

Stir thoroughly, apply with brush, roller, paint pad, or spray; follow with back-brushing if rolling.

Apply two coats on all exposed sides of the wood for optimal protection and appearance.

Apply at 45–80 °F with 40–60% relative humidity. Avoid application if rain is expected within 24 hours.

Use soap and water immediately after application—no solvents needed.

Wood species and porosity affect the final appearance—testing ensures color accuracy.

Yes—delivers UV resistance with both surface durability and deep wood protection.

No—it is not rated for subterranean or submerged applications.

Yes—it provides a durable finish that requires minimal upkeep over time.