ChemLink Clear General Purpose Sealant (24-Pack)

$214.83

Chemlink Clear Sealant Advantages

    • Solvent free, 100% solids will not shrink.
    • 20 minute skin over.
    • Non-slump, applies vertically and overhead.
    • No outgassing on damp surfaces.
    • Paintable within 24 hours (See limitations).
    • Gun grade, no special tools or mixing required.
    • Application at temperatures as low as 32 degrees
  • Chemlink Clear in 10.1 ounce cartridges sold in cartons of 24 (manufacturers code F1212)

Chemlink Clear General Purpose Sealant F1212

Chemlink Clear General Purpose Sealant is a multi-purpose polyether based, high-performance sealant that can be used to seal a wide range of construction materials.

Clear Applied

Chemlink Clear Sealant bonds to most roofing, siding, window, metal, flashing, HVAC and general construction surfaces.

Moisture curing, polyether sealant designed for application in damp, dry, or cold climates. Chemlink Clear Sealant is solvent free and contains no isocyanates. It will not shrink upon curing, will not discolor when exposed to UV light, and cannot "out‑gas" or bubble on damp surfaces as urethane sealants often do. Chemlink Clear Sealant has resilient "elastomeric" properties and excellent adhesion to most construction materials. It is capable of joint movement in excess of 25% in both compression and extension. Chemlink Clear Sealant can be used effectively in many difficult construction site conditions, curing in wet or dry climate conditions and at low temperatures 32°F (0°C).

Compatible Substrates

  • Aluminum and Galvanized Metal.
  • Stainless Steel.
  • Engineered Plastics, PVC.
  • Glass.
  • Fiberglass FRP.
  • Wood Block and Brick.
  • EPS Foam.
  • Concrete and Stone.

Basic Uses

  • Pre-cast Concrete.
  • Block and Masonry.
  • Window and door frames.
  • Siding.
  • Cove Joints.
  • Transportation.
  • Weather Sealing.

Available Sizes

  • carton of 24 - 10.1 oz cartridges

Color

  • Clear

Chemlink Clear Sealant Advantages

  • Solvent free, 100% solids will not shrink.
  • 20 minute skin over.
  • Non-slump, applies vertically and overhead.
  • No outgassing on damp surfaces.
  • Paintable within 24 hours (See limitations).
  • Gun grade, no special tools or mixing required.
  • Application at temperatures as low as 32 degrees F

Regulatory Compliance

  • Conforms to OTC Rule for Sealants and Caulks.
  • Meets requirements of California Regs: CARB, BAAQMD and SCAQMD.
  • Conforms to California Proposition 65.
  • Conforms to USDA Requirements for Non-food Contact.

Green Standards

  • LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Poi.
  • NAHB Model Green Home Building Guidelines: 5 Global Impact Points.
  • VOC Content: less than 14 grams/liter ASTM D2369 EPA Method 24 (tested at 240 degrees F

Literature

  • Data Sheet.
  • SDS.
  • Weight 20 lbs

Other Chemlink Sealants Available in Translucent:

  • DuraSil Silicone Adhesive Sealant
  • Metalink Silicone Metal Roof Sealant

Scroll down for more information
Vendors: ChemLink SKU: F1212

Chemlink Clear Sealant Advantages

    • Solvent free, 100% solids will not shrink.
    • 20 minute skin over.
    • Non-slump, applies vertically and overhead.
    • No outgassing on damp surfaces.
    • Paintable within 24 hours (See limitations).
    • Gun grade, no special tools or mixing required.
    • Application at temperatures as low as 32 degrees
  • Chemlink Clear in 10.1 ounce cartridges sold in cartons of 24 (manufacturers code F1212)

Chemlink Clear General Purpose Sealant F1212

Chemlink Clear General Purpose Sealant is a multi-purpose polyether based, high-performance sealant that can be used to seal a wide range of construction materials.

Clear Applied

Chemlink Clear Sealant bonds to most roofing, siding, window, metal, flashing, HVAC and general construction surfaces.

Moisture curing, polyether sealant designed for application in damp, dry, or cold climates. Chemlink Clear Sealant is solvent free and contains no isocyanates. It will not shrink upon curing, will not discolor when exposed to UV light, and cannot "out‑gas" or bubble on damp surfaces as urethane sealants often do. Chemlink Clear Sealant has resilient "elastomeric" properties and excellent adhesion to most construction materials. It is capable of joint movement in excess of 25% in both compression and extension. Chemlink Clear Sealant can be used effectively in many difficult construction site conditions, curing in wet or dry climate conditions and at low temperatures 32°F (0°C).

Compatible Substrates

  • Aluminum and Galvanized Metal.
  • Stainless Steel.
  • Engineered Plastics, PVC.
  • Glass.
  • Fiberglass FRP.
  • Wood Block and Brick.
  • EPS Foam.
  • Concrete and Stone.

Basic Uses

  • Pre-cast Concrete.
  • Block and Masonry.
  • Window and door frames.
  • Siding.
  • Cove Joints.
  • Transportation.
  • Weather Sealing.

Available Sizes

  • carton of 24 - 10.1 oz cartridges

Color

  • Clear

Chemlink Clear Sealant Advantages

  • Solvent free, 100% solids will not shrink.
  • 20 minute skin over.
  • Non-slump, applies vertically and overhead.
  • No outgassing on damp surfaces.
  • Paintable within 24 hours (See limitations).
  • Gun grade, no special tools or mixing required.
  • Application at temperatures as low as 32 degrees F

Regulatory Compliance

  • Conforms to OTC Rule for Sealants and Caulks.
  • Meets requirements of California Regs: CARB, BAAQMD and SCAQMD.
  • Conforms to California Proposition 65.
  • Conforms to USDA Requirements for Non-food Contact.

Green Standards

  • LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Poi.
  • NAHB Model Green Home Building Guidelines: 5 Global Impact Points.
  • VOC Content: less than 14 grams/liter ASTM D2369 EPA Method 24 (tested at 240 degrees F

Literature

  • Data Sheet.
  • SDS.
  • Weight 20 lbs

Other Chemlink Sealants Available in Translucent:

  • DuraSil Silicone Adhesive Sealant
  • Metalink Silicone Metal Roof Sealant