ChemLink E-Curb Kits
THE CHEMLINK E-CURB SYSTEM
Chemlink E-Curb precast form “slip-fit” components are composed of light weight nylon resin. The E-Curb is 2-inches high and available in a variety of shapes and sizes including bisected circular pieces having inside diameters of 3, 4, 5, 6, or 9-inches, corner pieces having a 2-inch radius, 3-inch and 8-inch straight pieces.
This product page is for Complete Low-Slope E-Curb Kits.
Please note that due to the holiday season, no Chemlink Brand orders placed from December 19, 2024, to January 1, 2025, will be shipped until January 2, 2025. While we are committed to processing and shipping orders as quickly as possible, we cannot guarantee that all orders placed between December 20, 2024, and January 1, 2025, will be shipped around January 2, 2025. However, rest assured we will do our best to fulfill your order as soon as possible.
We appreciate your understanding and wish you a wonderful holiday season!
ChemLink E-Curb Kits for Low-Slope Applications
Chemlink E-Curb penetration seals replace old-style metal pitch pans with versatile, precast components and 1-Part polyether pourable sealants. CHEM LINK’s E-Curb System can usually be installed in under 15 minutes and never requires flashing or mechanical attachment. E-Curbs are designed for use on granulated modified bitumen, asphalt and coal tar B.U.R. (built up roofing). E-Curbs are specified for PVC, EPDM, PIB, and TPO single ply roofing membranes. E-Curbs are highly versatile for sealing penetrations around solar panel mounts, HVAC, Electrical, and any type of structural supports. TPO Primer is required for use with TPO single-ply roof membrane.
What's in the Box?
3” Diameter E-Curb Round Kit
Kit contains 10 curbs, (8) 10.1 oz cartridges 1-Part Sealer
(2) 10.1 oz cartridges of M-1 Adhesive/Sealant
4” Diameter E-Curb Round Kit
Kit contains 4 curbs, (1) ½ gallon pouch 1-Part Pourable Sealer
(2) 10.1 oz cartridges of M-1 Adhesive/Sealant
4.5” x 3.5” Rectangle E-Curb Kit
Kit contains 4 curbs, (1) ½ gallon pouch 1-Part Pourable Sealer
(2) 10.1 oz cartridges of M-1 Adhesive/Sealant
5" Diameter E-Curb Round Kit
Kit contains 3 curbs, (1) ½ gal pouch of 1-Part Pourable Sealer
(2) 10.1 oz cartridge of M-1 Adhesive/Sealant
6” Diameter E-Curb Round Kit
Kit contains 3 curbs, (2) ½ gallon pouch 1-Part Pourable Sealer
(2) 10.1 oz cartridges of M-1 Adhesive/Sealant
9” Diameter E-Curb Round Kit
Kit contains 2 curbs, (2) ½ gallon pouch 1-Part Pourable Sealer
(2) 10.1 oz cartridges of M-1 Adhesive/Sealant
Installation
Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Remove all previously applied caulk, mastic, cement, asphalt, and other contaminants from penetrations with a wire brush. Brush away all gravel or loose granules. Isopropyl alcohol is an effective cleaner for surface preparation. Please contact customer service for application guidelines with temperatures below 32°F (0°C). Do not use on TPO without the use of TPO primer. Do not use on Hypalon. Smooth APP membranes require a granulated target. This product sets rapidly upon exposure to moisture. Please refer to data sheet for step-by-step installation guidelines.
Chemlink E-Curb System - Advantages
- Rapid installation - 'slip-fit' light weight curb design reduces labor significantly
- Excellent adhesion to most roofing materials.
- Labor Savings - No flashing or mechanical attachment required.
- 1-Part® pourable sealant accommodates movement and is suggested for use on all granulated membranes and details with excessive movement.
- Sealant is flexible down to -40°F (-40°C).
- Wide Range of Service Temperatures -40°F to 200°F (-40°C to 93°C)
Chemlink E-Curb System Components
- E-Curb exterior rings, straights, and corners.
- M-1 Structural Adhesive/Sealant used for bonding the E-Curb components, sealing and priming the penetration.
- 1-Part “moisture cure” pourable sealer, used to form a durable, water-tight seal around the roof penetration. US Patent No. RE41,586
Installing the Chemlink E-Curb Penetration Seal System
Specs
- Chemlink E-Curb Technical Data Sheet
- Chemlink E-Curb SDS
- Chemlink E-Curb and ChemCurb Systems Brochure
- Chemlink E-Curb Solar Penetration Seals
For Special Applications, Select Chemlink E-Curb Box Components and Appropriate Sealants
| Application (click for technical data sheet) | Chemlink Product Page | Video | Box Components (buy here) | Adhesive (buy here) | Sealant (buy here) |
|---|---|---|---|---|---|
| Steep Slopes | Steep Slope E-Curb Penetration Seal System | (click for video) | E-Curb Box Components | M-1 | Duralink 50 |
| Vertical Walls | (click for video) | E-Curb Box Components | Duralink 50 | Duralink 50 | |
| Metal Roofs | E-Curb Metal Roof Kits | (click for video) | >E-Curb Box Components | Duralink 50 | Duralink 50 |
| Silicone Roofs | E-Curb Box Components | DuraSil | DuraSil SL | ||
| Temps 200ºF | Hot Pipe E-Curb Penetration Seal System | E-Curb Box Components | DuraSil | DuraSil SL |
- Weight 19 lbs
- Chemlink E- 3” Diameter E-Curb Round Kit (10 curbs), 4” Diameter E-Curb Round Kit (4 curbs), 4.5” x 3.5” Rectangle E- Curb Kit (4 curbs), 5" Diameter E-Curb Round Kit (3 curbs), 6” Diameter
- Curb Kit E-Curb Round Kit (3 curbs), 9” Diameter E-Curb Round Kit (2 curbs)
- Color Gray, White (primer included), White (primer NOT included)
THE CHEMLINK E-CURB SYSTEM
Chemlink E-Curb precast form “slip-fit” components are composed of light weight nylon resin. The E-Curb is 2-inches high and available in a variety of shapes and sizes including bisected circular pieces having inside diameters of 3, 4, 5, 6, or 9-inches, corner pieces having a 2-inch radius, 3-inch and 8-inch straight pieces.
This product page is for Complete Low-Slope E-Curb Kits.
Please note that due to the holiday season, no Chemlink Brand orders placed from December 19, 2024, to January 1, 2025, will be shipped until January 2, 2025. While we are committed to processing and shipping orders as quickly as possible, we cannot guarantee that all orders placed between December 20, 2024, and January 1, 2025, will be shipped around January 2, 2025. However, rest assured we will do our best to fulfill your order as soon as possible.
We appreciate your understanding and wish you a wonderful holiday season!
ChemLink E-Curb Kits for Low-Slope Applications
Chemlink E-Curb penetration seals replace old-style metal pitch pans with versatile, precast components and 1-Part polyether pourable sealants. CHEM LINK’s E-Curb System can usually be installed in under 15 minutes and never requires flashing or mechanical attachment. E-Curbs are designed for use on granulated modified bitumen, asphalt and coal tar B.U.R. (built up roofing). E-Curbs are specified for PVC, EPDM, PIB, and TPO single ply roofing membranes. E-Curbs are highly versatile for sealing penetrations around solar panel mounts, HVAC, Electrical, and any type of structural supports. TPO Primer is required for use with TPO single-ply roof membrane.
What's in the Box?
3” Diameter E-Curb Round Kit
Kit contains 10 curbs, (8) 10.1 oz cartridges 1-Part Sealer
(2) 10.1 oz cartridges of M-1 Adhesive/Sealant
4” Diameter E-Curb Round Kit
Kit contains 4 curbs, (1) ½ gallon pouch 1-Part Pourable Sealer
(2) 10.1 oz cartridges of M-1 Adhesive/Sealant
4.5” x 3.5” Rectangle E-Curb Kit
Kit contains 4 curbs, (1) ½ gallon pouch 1-Part Pourable Sealer
(2) 10.1 oz cartridges of M-1 Adhesive/Sealant
5" Diameter E-Curb Round Kit
Kit contains 3 curbs, (1) ½ gal pouch of 1-Part Pourable Sealer
(2) 10.1 oz cartridge of M-1 Adhesive/Sealant
6” Diameter E-Curb Round Kit
Kit contains 3 curbs, (2) ½ gallon pouch 1-Part Pourable Sealer
(2) 10.1 oz cartridges of M-1 Adhesive/Sealant
9” Diameter E-Curb Round Kit
Kit contains 2 curbs, (2) ½ gallon pouch 1-Part Pourable Sealer
(2) 10.1 oz cartridges of M-1 Adhesive/Sealant
Installation
Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Remove all previously applied caulk, mastic, cement, asphalt, and other contaminants from penetrations with a wire brush. Brush away all gravel or loose granules. Isopropyl alcohol is an effective cleaner for surface preparation. Please contact customer service for application guidelines with temperatures below 32°F (0°C). Do not use on TPO without the use of TPO primer. Do not use on Hypalon. Smooth APP membranes require a granulated target. This product sets rapidly upon exposure to moisture. Please refer to data sheet for step-by-step installation guidelines.
Chemlink E-Curb System - Advantages
- Rapid installation - 'slip-fit' light weight curb design reduces labor significantly
- Excellent adhesion to most roofing materials.
- Labor Savings - No flashing or mechanical attachment required.
- 1-Part® pourable sealant accommodates movement and is suggested for use on all granulated membranes and details with excessive movement.
- Sealant is flexible down to -40°F (-40°C).
- Wide Range of Service Temperatures -40°F to 200°F (-40°C to 93°C)
Chemlink E-Curb System Components
- E-Curb exterior rings, straights, and corners.
- M-1 Structural Adhesive/Sealant used for bonding the E-Curb components, sealing and priming the penetration.
- 1-Part “moisture cure” pourable sealer, used to form a durable, water-tight seal around the roof penetration. US Patent No. RE41,586
Installing the Chemlink E-Curb Penetration Seal System
Specs
- Chemlink E-Curb Technical Data Sheet
- Chemlink E-Curb SDS
- Chemlink E-Curb and ChemCurb Systems Brochure
- Chemlink E-Curb Solar Penetration Seals
For Special Applications, Select Chemlink E-Curb Box Components and Appropriate Sealants
| Application (click for technical data sheet) | Chemlink Product Page | Video | Box Components (buy here) | Adhesive (buy here) | Sealant (buy here) |
|---|---|---|---|---|---|
| Steep Slopes | Steep Slope E-Curb Penetration Seal System | (click for video) | E-Curb Box Components | M-1 | Duralink 50 |
| Vertical Walls | (click for video) | E-Curb Box Components | Duralink 50 | Duralink 50 | |
| Metal Roofs | E-Curb Metal Roof Kits | (click for video) | >E-Curb Box Components | Duralink 50 | Duralink 50 |
| Silicone Roofs | E-Curb Box Components | DuraSil | DuraSil SL | ||
| Temps 200ºF | Hot Pipe E-Curb Penetration Seal System | E-Curb Box Components | DuraSil | DuraSil SL |
- Weight 19 lbs
- Chemlink E- 3” Diameter E-Curb Round Kit (10 curbs), 4” Diameter E-Curb Round Kit (4 curbs), 4.5” x 3.5” Rectangle E- Curb Kit (4 curbs), 5" Diameter E-Curb Round Kit (3 curbs), 6” Diameter
- Curb Kit E-Curb Round Kit (3 curbs), 9” Diameter E-Curb Round Kit (2 curbs)
- Color Gray, White (primer included), White (primer NOT included)