ChemLink Low Voc Epdm/tpo Primer

$59.27
  • A solvent based liquid primer that is designed to comply with VOC regulations. It can be brush applied to EPDM or TPO roofing membranes, plastics, and any other difficult bonding surface.

Please note that due to the holiday season, no Chemlink Brand orders placed from December 19, 2024, to January 1, 2025, will be shipped until January 2, 2025. While we are committed to processing and shipping orders as quickly as possible, we cannot guarantee that all orders placed between December 20, 2024, and January 1, 2025, will be shipped around January 2, 2025. However, rest assured we will do our best to fulfill your order as soon as possible.

We appreciate your understanding and wish you a wonderful holiday season!

Read SDS before use. Eliminate all ignition sources. DO NOT SMOKE. Mixing is not recommended, even when settling occurs. Do not thin. Thinning will affect performance. Clean debris from EPDM or TPO surface and wash with isopropyl alcohol. Brush apply the primer directly to the roof surface, starting at the base of the roof penetration, extending out a minimum of one inch beyond the perimeter of the ChemCurb/Ecurb on all sides. No streaks from primer starved areas should be visible. Allow the Low-VOC Primer to flash-off until it does not transfer to a dry finger touch yet remains tacky. Install ChemCurb/Ecurb according to application instructions. Coverage Rate - Approximately 700 ft²/gallon (65 m²). Only available through Chem Link distributors.

SHELF LIFE 9 months

VOC COMPLIANT less than 250 g/l

BASE synthetic rubber

SDS Low VOC Primer

Technical Bulletin Low VOC TPO Primer

Tech Data Sheet Low VOC Primer


Scroll down for more information
Vendors: ChemLink SKU: F1280
  • A solvent based liquid primer that is designed to comply with VOC regulations. It can be brush applied to EPDM or TPO roofing membranes, plastics, and any other difficult bonding surface.

Please note that due to the holiday season, no Chemlink Brand orders placed from December 19, 2024, to January 1, 2025, will be shipped until January 2, 2025. While we are committed to processing and shipping orders as quickly as possible, we cannot guarantee that all orders placed between December 20, 2024, and January 1, 2025, will be shipped around January 2, 2025. However, rest assured we will do our best to fulfill your order as soon as possible.

We appreciate your understanding and wish you a wonderful holiday season!

Read SDS before use. Eliminate all ignition sources. DO NOT SMOKE. Mixing is not recommended, even when settling occurs. Do not thin. Thinning will affect performance. Clean debris from EPDM or TPO surface and wash with isopropyl alcohol. Brush apply the primer directly to the roof surface, starting at the base of the roof penetration, extending out a minimum of one inch beyond the perimeter of the ChemCurb/Ecurb on all sides. No streaks from primer starved areas should be visible. Allow the Low-VOC Primer to flash-off until it does not transfer to a dry finger touch yet remains tacky. Install ChemCurb/Ecurb according to application instructions. Coverage Rate - Approximately 700 ft²/gallon (65 m²). Only available through Chem Link distributors.

SHELF LIFE 9 months

VOC COMPLIANT less than 250 g/l

BASE synthetic rubber

SDS Low VOC Primer

Technical Bulletin Low VOC TPO Primer

Tech Data Sheet Low VOC Primer