{"product_id":"afm-safecoat-zero-voc-semi-gloss","title":"AFM Safecoat Zero VOC Semi-Gloss Interior Enamel","description":"\u003cdiv class=\"font-weight-light uppersection\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZero VOC (0 g\/L per AFM's 2025 spec sheet), low-odor interior enamel with a durable semi-gloss finish.\u003c\/li\u003e\n\u003cli\u003eMade for walls, ceilings, woodwork, trim and primed metal where a washable, harder-wearing sheen is wanted.\u003c\/li\u003e\n\u003cli\u003eFormulated for indoor air quality: AFM states it contains no formaldehyde, ammonia, aromatic hydrocarbons, exempt solvents or hazardous air pollutants.\u003c\/li\u003e\n\u003cli\u003eWidely used in homes, schools, hospitals and offices, and by people who are chemically sensitive. Always test for personal tolerance.\u003c\/li\u003e\n\u003cli\u003eAvailable in Pure White, or tinted to your color in 1 gallon cans. 5 gallon pails come in Pure White.\u003c\/li\u003e\n\u003cli\u003eRecoat in 4 hours; fully cures and bonds over 7 days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"font-weight-light lowersection\" id=\"detailed-description\"\u003e\n\u003cdiv class=\"tabs\"\u003e\n\u003cul id=\"tabs-nav\"\u003e\n\u003cli\u003e\u003ca href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab2\"\u003eSpecs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab3\"\u003eAdditional information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- END tabs-nav --\u003e\n\u003cdiv id=\"tabs-content\"\u003e\n\u003cdiv class=\"tab-content\" id=\"tab1\"\u003e\n\u003ch2\u003eAFM Safecoat Zero VOC Semi-Gloss Interior Enamel\u003c\/h2\u003e\n\u003cp\u003eAFM Safecoat Zero VOC Semi-Gloss is a zero VOC semi-gloss paint for trim, doors, woodwork and walls that need a durable, cleanable finish: a fast-curing interior enamel with good film formation and the highest sheen in the Safecoat Zero VOC line. It also works on ceilings and primed metal, in any room where you want to keep chemical exposure low.\u003c\/p\u003e\n\u003cp\u003eAFM formulates Safecoat paints for optimal indoor air quality. The paint is zero VOC and contains no formaldehyde, ammonia, aromatic hydrocarbon compounds, exempt solvents or hazardous air pollutants, so it is a common choice for homes, schools, hospitals and offices and for people with chemical sensitivities.\u003c\/p\u003e\n\u003cp\u003eFor the best finish, prime first: use \u003ca href=\"\/products\/afm-safecoat-new-wallboard-primer\"\u003eSafecoat New Wallboard Primer\u003c\/a\u003e on new drywall and \u003ca href=\"\/products\/afm-safecoat-transitiional-primer\"\u003eSafecoat Transitional Primer\u003c\/a\u003e on previously painted surfaces in poor condition and on porous new wood, then apply two finish coats. Clean surfaces first with \u003ca href=\"\/products\/afm-safechoice-super-clean\"\u003eSafeChoice All-Purpose Cleaner (formerly Super Clean)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eChoosing a sheen in the Safecoat Zero VOC line, from lowest to highest: Flat, Pearl, Eggshell and Semi-Gloss. Higher sheens are generally easier to wipe clean; lower sheens hide surface imperfections better. Other sheens in the same line: \u003ca href=\"\/products\/afm-safecoat-zero-voc-flat\"\u003eFlat\u003c\/a\u003e, \u003ca href=\"\/products\/afm-safecoat-zero-voc-pearl\"\u003ePearl\u003c\/a\u003e, \u003ca href=\"\/products\/afm-safecoat-zero-voc-eggshell\"\u003eEggshell\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eColors\u003c\/h2\u003e\n\u003cp\u003eSearch the Color IS color chart by color name or number, or open the chart and click a swatch: the color's number and name then show next to the size you chose. Colors are tinted in 1 gallon cans; for 5 gallons of one color, order five 1-gallon cans. You can also enter another brand's color code. We tint with the AFM base your color requires, and the price shown includes the tinting charge. Tinted paint is made to order, adds about 5-10 business days, and cannot be returned. Colors from other brands are matched by computer formula and are close, but not guaranteed to be exact.\u003c\/p\u003e\n\u003ch2\u003eSheen\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-gloss\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSizes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 quart (Pure White)\u003c\/li\u003e\n\u003cli\u003e1 gallon (Pure White or tinted)\u003c\/li\u003e\n\u003cli\u003e5 gallon (Pure White)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-content\" id=\"tab2\"\u003e\n\u003ch3\u003eUse On\u003c\/h3\u003e\nNew or existing, properly primed interior walls and ceilings, properly cured and primed plaster (below 10 pH), masonry, woodwork and primed metal.\n\u003ch3\u003eCoverage\u003c\/h3\u003e\nOne gallon of Safecoat Zero VOC Semi-Gloss covers approximately 300-400 square feet, depending on surface porosity.\n\u003ch3\u003eDrying\/Curing Time\u003c\/h3\u003e\nUnder normal conditions, wait a minimum of 4 hours before recoating. The paint cures and bonds over a full 7-day period. Normal conditions include a dry surface, fresh air flow, 30-70% relative humidity and temperatures of 55-85°F. Thick application, high humidity or other conditions will slow drying and curing.\n\u003ch3\u003eClean-Up\u003c\/h3\u003e\nClean tools and equipment while still wet with warm soapy water. Store unused paint in an airtight container. To dispose of leftover paint, let it dry out first (add kitty litter in the can, or roll it out on cardboard). Do not pour paint down a sink or toilet.\n\u003ch3\u003eThinning\u003c\/h3\u003e\nFor spraying only: reduce with up to 1\/2 pint of water per gallon as needed.\n\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\nSurfaces must be clean, dry and free of dirt, grease, mildew and oil. Sand and clean before painting. Prime new drywall with Safecoat New Wallboard Primer; scrape and sand previously painted surfaces in poor condition, then prime with Safecoat Transitional Primer. Block water and tannin stains so they do not bleed through. Always spot test for adhesion over existing coatings.\n\u003ch3\u003eApplication\u003c\/h3\u003e\nAlways use adequate ventilation. Stir well before use, then apply with a high-quality nylon or synthetic brush, a roller (1\/4\"-3\/8\" nap) or an airless sprayer. Apply thin coats; do not load paint onto the surface. When spraying, use a 17\/1000 to 21\/1000 reversible tip and 30-mesh high-pressure filter, spray 18\" from the surface, overlap each pass by 1\/4 to 1\/2 of the fan width, and always wear a painter's mask.\n\u003ch3\u003ePhysical Data\u003c\/h3\u003e\nVOC: 0 g\/L (material). HAPs: zero. Low odor, mildly alkaline, white. Water dilutable.\n\u003ch3\u003eLimitations\u003c\/h3\u003e\nInterior use. Do not paint when the indoor temperature is under 55°F, and protect the paint from freezing. Safecoat paints contain no formaldehyde preservatives, so keep the can sealed and avoid contaminating it. Ideal conditions are 55-85°F and 30-70% relative humidity on a dry surface; see the Safety Data Sheet for handling and storage.\n\u003ch3\u003eHealth Precautions\u003c\/h3\u003e\nAs with all coatings, keep the container tightly closed and out of the reach of children. Do not take internally. Always use adequate ventilation, and wear a painter's mask when spraying. If you are chemically sensitive, always test for personal tolerance.\n\u003ch3\u003eLimited Liability\u003c\/h3\u003e\nSafecoat products are guaranteed not to be defective when properly applied. Liability express or implied is limited to replacement of product or refund of purchase price and does not include liability for labor costs or consequential damages. Variable factors out of manufacturer's control, such as environmental conditions, application techniques, and surface conditions are critical to results obtained. Users are expected to exercise reasonable care to determine suitability of the product for each application. We particularly recommend that users always test in small inconspicuous areas before applying to the entire surface.\n\u003ch4\u003eMore Information about AFM Safecoat Zero VOC Semi-Gloss\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0843\/7897\/6562\/files\/afm-safecoat-zero-voc-semi-gloss-spec-sheet-2025.pdf?v=1792900435\" target=\"_blank\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0843\/7897\/6562\/files\/afm-safecoat-zero-voc-semi-gloss-sds.pdf?v=1792900431\" target=\"_blank\"\u003eMSDS Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-content\" id=\"tab3\"\u003e\n\u003cul\u003e\n\u003cli\u003eBrand AFM Safecoat\u003c\/li\u003e\n\u003cli\u003eSize 1 Quart, 1 Gallon, 5 Gallon\u003c\/li\u003e\n\u003cli\u003eSheen Semi-gloss\u003c\/li\u003e\n\u003cli\u003eColor Pure White, or tinted (1 Gallon)\u003c\/li\u003e\n\u003cli\u003eVOC 0 g\/L\u003c\/li\u003e\n\u003cli\u003eAFM item numbers 14112 \/ 14212 \/ 14312 (Pure White), 14132 (Tint base), 14162 (Deep base), 14192 (Accent base)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"AFM safecoat","offers":[{"title":"1 Quart \/ Pure White (untinted)","offer_id":68037456331058,"sku":"14212","price":28.13,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Pure White (untinted)","offer_id":68037456363826,"sku":"14112","price":89.24,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Tinted - Color IS","offer_id":68037456396594,"sku":"14112-CIS","price":107.24,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Tinted - Tint base","offer_id":68037456429362,"sku":"14132","price":107.24,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Tinted - Deep base","offer_id":68037456462130,"sku":"14162","price":107.24,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Tinted - Accent base","offer_id":68037456494898,"sku":"14192","price":107.24,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Pure White (untinted)","offer_id":68037456527666,"sku":"14312","price":431.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0843\/7897\/6562\/files\/afm-safecoat-zero-voc-semi-gloss-interior-enamel-8349468.png?v=1793071147","url":"https:\/\/eco-buildingproducts.com\/products\/afm-safecoat-zero-voc-semi-gloss","provider":"Eco-Building Products","version":"1.0","type":"link"}