A natural oil / waterborne hybrid stain that protects wood from UV rays and delivers a paint-like surface build. It is formulated for exterior wood trim, doors windows and siding. It can be used on new or pre-stained wood.
A natural oil / waterborne hybrid stain that protects wood from UV rays and delivers a paint-like surface build. It is formulated for exterior wood trim, doors windows and siding. It can be used on new or pre-stained wood.
Description
Vermont Natural Coatings – Bohme – BoMol Exterior Trim Stain
Vermont Natural Coatings and Böhme’s BoMol Exterior trim stain is for use on trim, doors, windows and siding and can be used on new and pre-stained wood.
Protects wood from damaging UV rays.
Paint-like surface build with the penetration of a stain.
Böhme has been manufacturing stains and coatings in Switzerland since 1866. Now these natural hybrid-oil stains and finishes are made in the USA and available throughout North America through a partnership with Vermont Natural Coatings. The Böhme line, for both interior and exterior applications, applies, penetrates and looks like a traditional oil. These coatings clean up with soap and water, are easy to use and maintain, and are still < 30g/L VOC.
BoMol Exterior Trim Stain Features
Ultra-Low VOC (Less than 30g/L)
Covers 250-350 sq. ft. per gallon
Ready for second coat after 24 hours
12 month shelf life unopened
Available in quarts, gallons and five gallon pails
Easy application & water cleanup
Color
Available in 16 colors:
Vermont Natural Coatings Bohme BoMol Exterior Stain available in 16 colors
Available In:
5 Gallon
1 Gallon
8 oz. Sample
Also available in cases of 4 gallons and cases of 6 quarts
Surface Preparation:
Surfaces must be clean, dry and free of any grease, glue or other contaminants prior to staining.
For previously stained wood, sand surface lightly to help adhesion.
If coating unfinished softwood, we recommend using Suncare 900 as a pre-treatment.
For all other unfinished woods, pre-treat with Hydro-Oil Primer.
Application:
Stir well prior to use.
Always test the finish on a sample piece of wood to confirm the desired appearance.
Apply with brush, paint pad, roller or spray.
Two coats are recommended on all sides of wood.
Apply evenly with the grain and always maintain a wet edge. If rolling, follow with a brush or paint pad.
For best results apply in temperatures between 45° – 80°F and relative humidity of 40%-60% Do not apply when rain is expected within 24 hours.
Vermont Natural Coatings – Bohme – BoMol Exterior Trim Stain
Vermont Natural Coatings and Böhme’s BoMol Exterior trim stain is for use on trim, doors, windows and siding and can be used on new and pre-stained wood.
Protects wood from damaging UV rays.
Paint-like surface build with the penetration of a stain.
Böhme has been manufacturing stains and coatings in Switzerland since 1866. Now these natural hybrid-oil stains and finishes are made in the USA and available throughout North America through a partnership with Vermont Natural Coatings. The Böhme line, for both interior and exterior applications, applies, penetrates and looks like a traditional oil. These coatings clean up with soap and water, are easy to use and maintain, and are still < 30g/L VOC.
BoMol Exterior Trim Stain Features
Ultra-Low VOC (Less than 30g/L)
Covers 250-350 sq. ft. per gallon
Ready for second coat after 24 hours
12 month shelf life unopened
Available in quarts, gallons and five gallon pails
Easy application & water cleanup
Color
Available in 16 colors:
Vermont Natural Coatings Bohme BoMol Exterior Stain available in 16 colors
Available In:
5 Gallon
1 Gallon
8 oz. Sample
Also available in cases of 4 gallons and cases of 6 quarts
Surface Preparation:
Surfaces must be clean, dry and free of any grease, glue or other contaminants prior to staining.
For previously stained wood, sand surface lightly to help adhesion.
If coating unfinished softwood, we recommend using Suncare 900 as a pre-treatment.
For all other unfinished woods, pre-treat with Hydro-Oil Primer.
Application:
Stir well prior to use.
Always test the finish on a sample piece of wood to confirm the desired appearance.
Apply with brush, paint pad, roller or spray.
Two coats are recommended on all sides of wood.
Apply evenly with the grain and always maintain a wet edge. If rolling, follow with a brush or paint pad.
For best results apply in temperatures between 45° – 80°F and relative humidity of 40%-60% Do not apply when rain is expected within 24 hours.
