Chemlink M-1 CR Clean Room Sealant

$149.95

M-1 CR Clean Room Sealant is a thermosetting, moisture cure sealant which does not contain solvent or isocyanates. M-1 CR has been tested for airborne molecular contamination and is approved for semiconductor clean room use. Fully cured M-1 CR releases virtually no molecular air contamination at room temperature. Chemlink M-1 CR Clean Room Sealant is specified for biomedical, electronics, and aerospace clean rooms where contamination of the air and working surfaces cannot be tolerated. Chemlink M-1 CR Clean Room Sealant also used in food processing, hospitals, schools, offices and public buildings. Available only in 10.1 ounce cartridges (case of 16).

Clear

Description

Chemlink M-1 CR Clean Room Sealant

Available in a case of 16 of the 10.1 ounce cartridges

Description

M-1 CR Clean Room Sealant is solvent-free, extremely low VOC, moisture curing, polyether adhesive/sealant designed for application in areas where “out gassing” and solvents are not tolerated

M-1 CR Clean Room Sealant is solvent-free, extremely low VOC, moisture curing, polyether adhesive-sealant designed for application in areas where outgassing and solvents are not tolerated. It releases virtually no molecular air contamination and contains no isocyanates.

M-1 CR will not shrink upon curing, will not discolor when exposed to UV light, and can not “out-gas” on damp surfaces as is common with urethane sealants. The product has resilient “elastomeric” properties and excellent adhesion to most construction materials.

M-1 CR is designed for environments where molecular airborne contamination can impact human health or clean room manufacturing operations and is specified for biomedical, electronic and aerospace clean rooms.

Applicable Performance Standards

  • ASTM C920, Type S, Grade NS, Class 25, Uses NT, T1, M, G, A, and O
  • Federal Specification TT-S-00230-C Type II, Class B
  • Corps of Engineers CRD-C-541, Type II, Class B
  • Canadian Standards Board CAN 19, 13-M82

Regulatory Compliance

  • Conforms to OTC Rule for Sealants and Caulks
  • Meets requirements of California Regs: CARB, BAAQMD and SCAQMD
  • This product does not contain cancer causing chemicals listed in California Proposition 65
  • Conforms to USDA Requirements for Non-food Contact

Advantages

  • 100% VOC Compliant less than 15 grams/liter
  • Tough elastomeric bonds
  • Solvent Free
  • Fast Setting
  • High adhesion
  • Paintable within 24 hours
  • Gun grade, no special tools or mixing required
  • Can be applied at temperatures as low as 32°F (0°C)

Available Sizes

  • field pack of 16 – 10.1 oz cartridges

Chemlink M-1 Colors

  • Gray
  • White
  • Black (special order)

Specs

Chemlink M-1 Advantages

  • Non-shrinking
  • No solvents – non-toxic – no odor – no risk to human health
  • Applies down to 32°F/0°C
  • Continuous service at 200° F/93°C
  • Effective on damp surfaces
  • Skins over in 30 minutes
  • Paintable
  • Non-slumping, applies vertically and overhead
  • Good color stability, UV stable
  • Gun grade, no special tools or mixing required

Regulatory Compliance

  • Conforms to OTC Rule for Sealants and Caulks
  • Meets requirements of California Regs: CARB, BAAQMD and SCAQMD
  • Conforms to California Proposition 65
  • Conforms to USDA Requirements for Non-food Contact

Green Standards

  • LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
  • NAHB Model Green Home Building Guidelines: 5 Global Impact Points
  • VOC Content: less than 19 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F/115°

Literature

Chemlink M-1 Clean Room for Healthy Schools, part 1
Chemlink M-1 Clean Room for Healthy Schools, part 2

Additional information

Weight 22.5
Color

, ,

Reviews

There are no reviews yet.

Be the first to review “Chemlink M-1 CR Clean Room Sealant”

Your email address will not be published. Required fields are marked *