Sale!
BARRcartridge_label
BARR Applied

ChemLink BARR FP Gun Grade Rubber Flash & Patch (24-Pack)

5 out of 5 based on 1 customer rating
(1 customer review)

$85.20 $76.80

  • Advanced polyether technology—superior performance.
  • Applies from 10.1 oz. cartridge.
  • Adheres to concrete, metal, and wood.
  • Solvent free.
  • Applies to damp surfaces.
  • Applies down to 35°F.
  • Conforms to OTC Rule for sealants- -Non-toxic—no risk to workers or building inhabitants.
  • Superior performance compared to standard black mastics.
  • 100% solids: will not shrink.
  • 30 minute skin over.

Product Description

Description

Barr FP Flash and Patch Mastic Product Description

BARR FP™ is a high quality, moisture curing elastomeric waterproofing and sealing material, BARR Appliedformulated to gun directly into masonry cracks and  seams. BARR FP delivers superior performance compared to conventional products such as asphalt or tar-based sealants. Appropriate for use in repairing roof leaks, roof valley and seams, chimneys, flashings, and emergency roof repairs.

Emergency Repair

Remove all standing water and clean substrate. Temperatures should be above 35°F (2°C) and rising. Cut nozzle and puncture inner seal to apply sufficient material for the repair. Firmly trowel material extending the patch a minimum of 4” past the repair area. This application should be considered a temporary repair until weather conditions allow for a more permanent repair can be made.

Compatible Substrates

  • Concrete.
  • Steel Block and Brick.
  • Aluminum.
  • Stone.
  • Galvanized Metal.
  • Masonry.
  • Isoboard Plywood and OSB.
  • Untreated Wood.
  • EPS (Expanded Polystyrene).
  • FRP (Fiber Reinforced Plastic).

Basic Uses

  • Above grade waterproofing.
  • Below grade waterproofing.
  • Roof Repairs.
  • Sealing parapets.
  • Lining gutters and valleys.
  • Planter boxes.
  • Lining.
  • HVAC condensation pans.

 Available Sizes

  • carton of 24 – 10.1 oz cartridges.

Color

  • Black.

Specs

BARR FP Waterproofing Advantages

  • Advanced polyether technology—superior performance.
  • Applies from 10.1 oz. cartridge.
  • Adheres to concrete, metal, and wood.
  • Solvent free.
  • Applies to damp surfaces.
  • Applies down to 35°F.
  • Conforms to OTC Rule for sealants- -Non-toxic—no risk to workers or building inhabitants.
  • Superior performance compared to standard black mastics.
  • 100% solids: will not shrink.
  • 30 minute skin over.

Regulatory Compliance

  • Conforms to OTC Rule for Sealants.
  • Meets requirements of California Regs: CARB and SCAQMD.
  • This product does not contain cancer causing chemicals listed in California Proposition 65.
  • Conforms to USDA Requirements for Non-food Contact.

Green Standards

  • LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point.
  • NAHB Model Green Home Building Guidelines: 5 Global Impact Points.
  • VOC Content: less than 26 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F/115°C).

Literature

Additional Information

Weight 27

1 review for ChemLink BARR FP Gun Grade Rubber Flash & Patch (24-Pack)

  1. 5 out of 5

    :

    No more leaking roof. The eco-building products staff were very helpful getting my order shipped immediately when I informed them of my situation. Thanks again guys!

Add a review

Your email address will not be published. Required fields are marked *